2015-08-10: Back In The Game

After my rather dramatic post last time, I just couldn't wait anymore and had to get out to see the bees.  I armed myself with some Benadryl, my EpiPen and my friend Keith and headed out to do some inspections!  I actually donned the FULL bee suit as well, which I haven't worn since I did the shed cut-out.  Dang is that thing hot!  My goals were to check and see if the cut-out hive had successfully re-queened themselves and to check the nuc hives to see how they were doing with the new queens in them.

Cut-Out Hive / Yellow Hive:

I had Keith do all the work and I just barked orders the entire time.  Thankfully Keith is a really good sport and was happy to help me out.  He removed the cover, took off the extra boxes that were covering the honey feeder and got into the first box.  The bees were pretty sparse here and there were only a few frames with any wax drawn at all.  And even those frames only had a few spots on them with any wax.  That box came off and we were into the next box.  Slightly more wax built out in this box but about half the frames were still untouched.  Finally after getting to the last three frames we were able to see some good drawn frames.

Plastic Frames being filled

About 3/4 of the frame was drawn and there was some capped honey and some nice pollen in the cells.  The next frame was very similar and I was able to spot some larva scattered here and there.  This was the first good sign that a queen was present.  We grabbed the last frame and look who we spotted!

Cut Out has a new Queen!

She's a beauty!  Look at how dark she is.  She definitely has some non-Italian genetics in her.  I'm hoping she has "Winter Survivor" written all over her!  I followed her around with the camera for a bit and if you zoom in on this photo you can see she has eggs in every cell.  Good job!

New Queen and Eggs

At this point I really didn't need to go into the last box since I know they were able to re-queen themselves.  I had Keith take a few frames from the top box that had some wax on them and swap them with some of the frames that had no wax on them.  Then we removed the top box entirely.  They have a lot of wax to draw still and they don't really need that extra space to police.  I also decided that since there weren't really a lot of bees in the hive that I would put the entrance reducer on.  We are probably due for a nectar dearth and I don't want the strong neighboring hives to bust in and rob this hive out.  I'll probably make up some syrup to feed them and this should get them to draw out some more wax.  I need them to fill out three medium boxes before Winter sets in.

Speaking of Winter, I see the Goldenrod starting to bloom in my area.  That always signals the approach of Fall.  Many of my late blooming flowers are also in full bloom.

Coneflowers in bloom

Green Nuc:

Since my Nuc hives only have 5 frames, it makes them really quick and easy to check.  Most of the honey frames that I put in are still full.  They have eaten a little bit and replaced it with pollen which is a good thing.  Two frames in and we hit the first solid brood frame.  The new queen looks like she is settling in nicely!

Solid brood pattern

The very next frame over I was able to spot her majesty.  The green dot on her back makes it a little too easy to spot her.

Queenie

This hive is doing pretty well with two frames of brood front and back and two frames of honey and pollen.  The one empty frame I had given them sadly remained empty.  They had a few blobs of comb ridges created but I didn't care too much for them.  I had Keith scrape some it off the frame.  I'm hoping when all these sealed brood start hatching out that there will be a lot of new bees that will be primed to start drawing wax.  I need to get busy building some boxes so I can move these nucs into full sized hives soon.

Yellow Nuc:

Very similar to the Green Nuc.  Two honey frames that the bees had eaten a little from and replaced with either pollen or more nectar.  Two pretty solid frames of capped brood.

Capped brood on Honey Super Cell plastic frames

This hive seemed to be much more interested in drawing some comb on the new plastic frames though.

New comb and brood

Since this was a medium sized frame that I placed into a deep sized box, the bees have drawn comb off the bottom of the frame to fill in the space.  Bees are sure efficient!

On the opposite side of this frame they decided to draw a few of the same ridges I described in the last nuc.  At least they've drawn plenty of normal looking comb too.

Comb ridges

I'm wondering if they were just stealing wax from one part of the comb to make this instead of drawing new wax? 

We spotted the queen on the next frame and that was the last thing I needed to see.  This was a very successful inspection.

Next Steps:

I plan on making some 1:1 sugar syrup to feed to the hives trying to draw new wax.  I need to get the full sized boxes ready to move the nucs into.  I also need to give Green Hive a check to see how much of the two honey supers they have filled and also to see if the new queen is doing alright in there as well.  I'd also like to do some Varroa monitoring with a powdered sugar shake.  That sounds like a lot to do and we are already half way through August!

As always, thanks for reading!

2015-07-15: Cut Out Hive and New Queens!

I've finally accomplished two of the goals I set for this year: split my hives and get some better genetics with some Michigan raised "survivor" queens!  I learned about the Northern Bee Network at the Michigan Beekeepers conference in the Spring, so I went through their list of Queen breeders and found one that followed practices I conform to.  I placed an order for three queens and on Wednesday morning I received a phone call at 6 AM from the post office telling me to come get my bees.

Three Queens

The Splits:

The basic concept of how I was going to do my splits was to select two frames of open/capped brood and two frames of honey/pollen from the donor hive and place them into the 5 frame nuc box.  The remaining frame would be an empty frame with plastic foundation with the new queen cage on it.  Key number one is making sure you don't accidentally transfer your existing queen into the new hive!

I began in Green Hive by quickly scanning a few frames in the honey supers just to see how they were doing.  Almost every frame of foundation was drawn and filled with nectar.  They are doing great!  I then removed the two honey supers and started going through the brood boxes.  The first few frames on the outside were solid honey.  After I made a few adjustments to the bulges in the comb, I transferred them to the nuc box.  Two honey frames done.  Now to find the brood frames and the queen.  Next few frames had some eggs and a lot of honey so I didn't take them.  Frame five had some nice capped brood, so I meticulously studied it looking for the queen.  Flipped the frame over and looked for her again.  Back and forth two more times after that and I was satisfied she wasn't there.  I walked over to put it into the nuc and checked it one more time.  In it went.  Frame number six was another good brood frame.  Looking....looking....flip....looking....bam!  There she is hiding in the gap between the frame and the comb.  Each time I flipped the frame she'd run back to the other side.  Sneaky!  I took a queen marking cup my wife had bought for me and scooped her up into it and set her off to the side (more on this later).

Queen in the marking cup

I took this frame and into the nuc it went.  I pulled out the first queen cage and the queen looked alive and well inside.  I then noticed it had a piece duct tape over the end.

Queen cage

I assumed the duct tape was to prevent the candy from being eaten by the bees during shipment, but since the end is stuck down into a hole in the shipping cage, I'm not really sure how they would get to it.  Anyway, I removed the tape, exposed the candy and wedged the cage in between two of the frames.  First nuc complete!  I took another one of the queen cages and put her into the donor hive and closed it up.

First nuc complete

The second nuc was a bit more difficult.  After pulling off the honey super I went through the entire first brood box and only found one good frame of honey and one good frame of brood.  I did spot the queen and made sure that frame was out of the way.  I had to go into the bottom box to look for two more frames.  Generally I don't really go into the bottom box unless I really have to.  You always end up crushing some bees when moving boxes around and they are also really heavy!  Thankfully I pulled the first frame in the bottom box and it was solid honey.  Into the nuc with you!  The next frame was a fantastic brood frame!  Nuc #2 was complete with the added plastic frame and queen cage.  I replaced the frames from the donor hive with the same empty plastic frames and put the boxes back together.

This all sounds pretty simple but all told it took about 3.5 hours!

Requeening:

Remember that queen I had removed and put into the marking cup?  Well, the reason I removed her from the hive was because I was noticing many signs from this hive of what I think is Chronic Bee Paralysis Virus. The characteristic symptoms are bees with a greasy black shiny appearance, trembling bees unable to fly, clusters of bees walking on the ground and healthy bees trying to drag the sick bees out of the hive.  I was able to spot all of these symptoms.

Sick "greasy" looking bee

Clusters of bees walking on the ground

Sick bees being dragged out

This disease is typically vectored in from the dreaded Varroa mite.  I haven't done mite counts yet this year but when I do I wouldn't be surprised to see a higher count in this hive.  Since they don't have treatments for this disease, the recommendation is to requeen the hive.  This will give some new genetics that hopefully won't be as susceptible to the disease, as well as giving a break in the brood cycle while the new queen is being released and eventually begins to lay eggs.  The break in the bee's brood cycle also gives a break to the Varroa mite's cycle as well since they only reproduce in capped brood.

So as far as requeening goes, putting a new queen into the hive is one thing.  Removing the old queen is another.  And dispatching the old queen yet another.  Is it sad that I was getting all worked up over having to kill the old queen?  Well, I couldn't get myself to just "pinch" her.  Since you can make a swarm lure by soaking dead queens in alcohol, I though about just tossing her into a jar of alcohol.  But the thought of drowning freaks me out so I couldn't do that either.  I finally decided to put her in the refrigerator.  If it is anything like dying from hypothermia, then slowly "going to sleep" from the cold might not be such a bad way to go.  I hope it works that way anyway!  Green Hive queen is dead.  Long live the new queen!

Cut Out Hive:

 The bees from the cut out seem to be settling into their new home, Yellow Hive.  I have fed them two mason jars filled with honey so far to make up for all the honey I stole from them during the cut out.  I found the girls have done a really good job of attaching the combs rubber banded into the frames.  And they've started to chew through the rubber bands as well.

Cut out comb

 There are plenty of larva on the frames as well as nectar and pollen so that is a good sign.  The not so great sign is that I did NOT get the queen.  Here is the evidence:

Emergency Queen cells

I spotted numerous capped and uncapped emergency queen cells across a number of frames.  Probably around 8 in total.  The good thing is that at least they had some viable larva that they could start turning into queens.  I had thought about ordering another queen to place into this hive but since they already have some capped cells, I decided to let them raise their own queen.  A capped queen cell should emerge in about 8 days from now.  Twelve days after that (assuming she has good weather for her mating flights and doesn't get eaten by a bird) she should be laying eggs.  So, sometime in mid August Yellow Hive should be back in action again!


Next Steps:

I'll be checking the hives to make sure the new queens have been released in a few days.  After that I will do another full inspection to make sure there are new eggs and larva.  I'll plan on doing some mite sampling at that time as well.

Until then.......thanks for reading!

First Full Inspection: 2015-05-13

The 2015 Beekeeping season is now officially in full swing!  I've done my first complete inspection of both hives and things are looking good so far.

White and Green Hives.  Life long buddies.

White Hive:

Upon opening the hive up, the first thing I found was that instead of hanging out in the middle of the hive, they've chosen one side over the other.  It must smell better over there or maybe there was more honey and pollen left on those frames from last year?

The Left side is where the cool kids hang out

Anyway, it made it easy to figure out which side to start my inspection on.  So I pulled out the frames on the empty side and quickly worked my way toward the middle.  On frame 6 I found a nice frame of fresh, colorful pollen.

Pollen

Some pretty typical orange and yellow colors for this time of year.  I was hoping that the bees would have a chance of gathering some steel blue colored pollen from the Siberian Squill I planted but the blooms were already spent by the time the bees arrived.  Maybe next year.

Moving on to frame 7 I spotted the first frame of capped brood.

Future baby bees

It has only been about 14 days since the bees were installed and usually it takes a few days for the queen to be released from her cage, and then maybe a few more days before she even starts laying eggs.  The eggs hatch into larvae and then the cell is sealed on day 9.  So, I'm guessing these cells have only been capped for a few days at most.  If that means the eggs were laid 12 days ago, then in 9 more days they will start hatching.  Then we'll get to see what this queen's genetics are going to look like.  This hive has been a bit more "touchy" than the Green Hive so far.  Hopefully when the new bees take over they will have a little calmer disposition.



Green Hive:

I love the look of new comb on foundationless frames!  Green Hive did not disappoint me either.

New comb being formed

It is fascinating to watch as the bees drawn down a sheet of hexagons on the frame.  The new wax is a nice pale yellow color and it is just waiting to store something!

Well, this queen has been filling the frames with brood.

Pretty solid brood

Sometimes new queen have a very spotty brood pattern when they first start.  This frame looks pretty good to me.  You can also see that there is a cluster of drone brood along the bottom of this frame.  Right before I took this picture the bees were doing there job, covering the frame and keeping the brood warm.  If you blow on them, they don't like it and they move out of the way rather quickly.  I think it has something to do with the CO2 that we exhale.

A few frames over I was able to grab a nice close up of the developing larva.

"C" shaped larva

Notice the different sizes of the larva.  The queen usually lays her eggs in a circular spiral pattern.  So the larva in the center of the frame are bigger (older) and the ones toward the outside edge are smaller.  If you zoom in really close on this photo you can even see the eggs to the right of the smallest larva.

I'm really glad to see both hives getting off to a really good start so far in 2015!

Next Steps:

I have completed my solar Arduino setup and I plan on deploying that again soon.  I also plan on taking some of the remaining honey frames from the hive that died this past winter and feeding it back to the bees.

Until next time, thanks for reading!

Hive Autopsy : 2015-04-12

When the weather finally started turning to above freezing temps back in mid-March, I started to get really excited thinking my bees had made it through the winter.  Sadly, about the same time I stopped noticing any audible response from the hive when I would knock on it.  The day the temp hit 60 degrees I couldn't wait any longer and I popped open the lid to take a look.  A few dead stray bees were in the top box but none of the honey had been touched.  This was not too surprising since the hive was four deep boxes tall.  The next box was also full of honey and no bees.  In the next box down I found the dead cluster on about 5 frames.  Dang.  This past weekend I finally had a chance to bring the hive into the pole barn and take it apart to do an autopsy.

This was a very depressing task but if I am making mistakes I want to learn from them!  Usually a hive dies because either they starved to death, they froze to death (these two are often connected), or they had some sort of disease or queenless problem.  Here is what I found:

First off, I noticed that the dead bees on the bottom board were mostly on the left hand side.

Dead bees on the bottom board

Usually they cluster in the middle of the box but for whatever reason they favored the left hand side.  The top of the picture shown here is facing the North, so bees started on the West (left) side of the box (frame 1).  I'm not really sure if that evidence is of any note.  The lack of dead bees on the bottom of this picture is because that is where the hive entrance was located and I had been cleaning the dead bees out of the entrance every week.

After looking over a few of the frames I could see they were mostly devoid of honey.

There was a tiny bit of honey on the top of the first frame, but the rest were empty.

The size of the cluster looked pretty large to me so I think they had plenty of bees to generate enough heat to stay alive.

On the fourth frame I noticed a small patch of brood.

You can see about eight capped brood cells amongst the dead and moldy bees with their heads down in the cells.

The other side of of this frame had even more capped brood cells.

Not a drop of honey on these frames until frame 8, 9 and 10.

These frames were solid honey.

With no honey left on the frames that the cluster was on and also that there were brood on those frames, I would say that the cluster was unable to move to the honey next to them.  Essentially they starved/froze to death.  In a sad twist, I'm wondering if there weren't TOO MANY bees in the hive! 

<sigh>

Well, on a more positive note, I had ordered two more packages of bees that are scheduled to arrive on April 26.  Also, the Siberian Squill that I planted in the Fall for the bees is up!

I have also been working on my solar powered Arduino hive monitor and I have it working.  I need to build a stand of some sort for the solar panel and set it up out in the bee yard. 

Another one of my goals this year is to introduce some Michigan survivor stock genetics into my apiary.  I've been in contact with Northern Bee Network and I plan to order some queens once my new bees are established.

Thank goodness for the renewal of Spring!!  As always, thanks for reading.

Bee Blog Slacker: 2014-09-20

Well a lot has happened in the bee world since my last post in June.  I guess things get crazy here in Michigan during the summer time when it seems so short but that is no excuse!  Thank you to my lovely daughter for reminding me that people are worried about the bees and they are left in suspense if I don't write these posts.....heheheheh  =)

Here is a quick summary of what has happened since:

Green Hive:  

Doing OK but not strong.  Had some queen drama where I found no brood in the hive during an inspection on 7/24 and found capped queen cells in White Hive.  I transferred the capped queen cells to the Green Hive and after looking through the photos I took during the inspection I spotted that there was a queen in Green Hive after all!!!  So either the queen in Green Hive was a virgin or not laying eggs for some other reason.

White Hive:  

Strong compared to Green Hive for sure.  This hive may have swarmed since I spotted all the capped and uncapped queen cells.  Usually they build swarm cells along the bottom of the comb so this does follow that pattern.  If they did swarm then about half of this colony is hopefully living in a cozy tree somewhere!

Lots of capped Drone brood and a few queen cells

So now fast forward from then end of July and into the end of September (that sounds really depressing actually).  I just did a full top to bottom inspection of Green Hive and I checked the honey super on White Hive to see if it was ready to come off.

Green Hive: 

The top box had about 4 totally empty frames.  It is too late in the year now for the bees to have enough incoming nectar to make wax.  So they will stay empty for the rest of this year.  There was one frame of solid honey and the rest of the frames had a mixture of honey, nectar and bee bread.

What the heck is bee bread you ask?  When bees bring the pollen back to the hive, another worker bee packs the pollen into a cell and adds some honey or nectar and enzymes to it.  This causes some fermentation to occur and breaks the pollen down into a more consumable form for the bees.

Lots of maroon colored bee bread on this frame

Compare the color of the bee bread to the color of the fresh yellow pollen on the back of this bees leg in this photo:

This bee bread is the primary source of food for developing brood.  Since this hive doesn't have any brood, they have a lot of bee bread stored.

The bottom box has only two empty frames and most of the remaining frames are packed full of bee bread or honey with very few empty cells.

Solid frame of honey

The bottom line for Green Hive is that they appear hopelessly queenless.  This late in the year there is really no possibility of buying a replacement queen.  I did check around online and every place I looked is sold out (and probably were sold out months ago).  Also, there is no hope of the bees having enough time to raise their own queen if I donated some eggs from White Hive.  It would take at least 16 days for a new queen to hatch.  By then it would be the middle of October and there would be no drones for her to mate with.  Matter of fact, during my inspection, I witnessed numerous drones being dragged out of the hive by their loving sisters.  I think the only option I have now is to combine this hive with White Hive (Newspaper Combine).  After I do that my remaining hive will go into Winter with FOUR deeps of food and bees.  No matter how bad the upcoming Winter is, that should be plenty to get them through it.

White Hive:

Even with the possibility that this hive swarmed earlier, it is still a strong hive.  They have managed to fill about half of a honey super.  Not great but better than nothing.  I plan to take this honey off when I combine Green Hive with this one.  I might be able to get 1 gallon of honey from this box.

What's Next:

I'm planning on doing the combine, removing the honey and doing a mite sampling tonight.  If I have enough time I'll extract the honey this weekend.  The next blog post will be up shortly!

As always, thanks for reading!

Guest Beekeeper : 2014-06-25

One of the fun things about beekeeping for me is teaching others about bees.  I have found many seemingly willing students.  Or at least ones that feign interest while I blab on and on about the bees.  I have also tried to get as many of these people as possible into the beehives.  For this inspection, I was fortunate enough to have Byron be my guest beekeeper.  It sure doesn't hurt to have an extra set of hands either!

My main concern for this inspection was to make sure the bees hadn't run out of room, since each hive consisted of only one box.  At this point they should be covering most of the frames and be ready for a second box to be added.  I was also hoping I hadn't waited too long and they weren't preparing to swarm!

Green Hive:

I took my time going through this hive since I wanted to be able to show Byron all the facets of beekeeping.  How to separate and manipulate the frames.  How to use the smoker and hive tool.  And what to look for in the hive: nectar, pollen, honey, eggs, larvae, capped cells, workers, drones and the queen.  The bees had just started to draw wax on the first two frames in the hive so I was able to show him how they create the wax in an empty frame.  He was also able to see the festooning behavior of the bees as they constructed the new wax comb.  The queen in this hive remained elusive and we did not spot her.  Although we did see some eggs and very young lava so she was there somewhere.  A second deep box of empty frames is now on this hive.  I have a feeling I should have used a technique called pyramiding to encourage them to move into the new box.  If they haven't done so by the next inspection I will make it so.

White Hive:

This hive had a second box added with some frames from the hive that died this past winter.  Some were empty brood frames and some were filled with honey.  Since this hive appears stronger, the bees were already working these frames.  After going through these I let Byron take over the inspection.  I'm sure it was his observation of my fantastic abilities that allowed him to jump right in like a pro!!  LOL

Byron inspecting the hive

The queen in this hive seems incredible to me.  She has solid brood patters across almost every single frame.  This hive will sure need the room in that second box!

Lots of brood

Even more brood

I never get tired of seeing new bees being born and emerging from their cells.  This inspection was no disappointment when we spotted 3 drones being born at the same time!

Welcome to the hive boys

After Byron had pulled 8 frames I thought for sure I was going to strikeout in showing him the queen.  But when we pulled frame 9 there she was!

Smile Queeny!

After watching her run around for a bit, we completed the inspection and closed up the box.

All in all, both hives are doing well and it was a great evening for an inspection.  Next inspection I will hopefully see that the queens have moved up into the second box and started laying eggs there.  I'm also planning on creating one or two nucleus hives and buying a "northern" queens to put in them.  At worst, this will allow me to have some backup hives in case one of the hives fails.  At best they will become fully established hives with better genetics for surviving these horrible Michigan winters!

Until next time, thanks for reading!

Second Inspection: 2014-06-10

I was very eager to complete this second inspection for a few reasons.  First, I was very eager to retrieve my fist set of Arduino Smart Hive data!  Second, the hives are currently at Installation +30 days (Bee Math) and there should be many more young bees in the hive.  Not only will these bees be nurses for the next generation, but they will also be wax comb builders (Honey Bee Worker Jobs).  So, they should be expanding the nest area and allowing more bees to forage for nectar and pollen.  The increasing number of bees also means they will be running out of space soon.  Normally in nature, the size of the cavity the bees live in does not increase and when they run out of room they swarm.  Part of being a beekeeper is controlling the bee's swarming nature by adding more space (boxes) and I needed to see if it was time to add another box or not.  If your hive does swarm you've lost probably half of your bees and your old queen.  Not a good thing if you actually want any honey.  Plus most of your neighbors probably wouldn't appreciate a swarm of bees landing in their yard!  Well, onto the inspections...

Green Hive:

I opened the lid and found that my ventilation board with my electronics in it was nicely stuck to the top of the lid.  There must have been some propolis left on the underside of the lid and it works really nicely as glue.  I spent a few minutes trying to remove the ventilation form and when I finally removed it, I notice a LARGE, furry black spider resting comfortably on the underside of the lid.  Thankfully I was armed with a steel hive tool and dispatched the menace quickly.  I really dislike spiders but I also know they do eat "bad" insects, so I try to leave them alone when I spot them in the garden.  But when they are around my bees I show now mercy!  I'm sure beekeepers in Arizona, Florida or Australia can get some really nasty surprises around their hives.  Yikes. 

Anyway, after all that drama, I pulled the SD memory card from the Arduino and downloaded the data.  My first disappointment was that it appeared that it only logged about 3 days worth of data.  It appears my 6 AA battery pack didn't last very long at all.  I'll be looking into an alternate power source for sure now.

Arduino Smart Hive data

With that said, it was cool to see that the general data collection does work!  From the data it looks like the external sensor might be a little flaky since the humidity spiked at 100% a number of times and the temperature measured at 103.82 F on June 2, 3:22 PM.  According to the weather report on that day, the highest it hit was 82 F.  Other than that oddity, the data looks consistent.  What I really like seeing are the readings from the brood area.  The temperature reading is a very flat, steady line, right around 95 F.  Despite what the outside temperature is, they do a fantastic job of maintaining the same temperature and humidity levels where the baby bees are being raised.

Pulling the first two frames from the hive, I saw they were still empty.  The third frame in was built much wider because of the empty space next to it.  With the top down view in the photo below, you can see how the wax sticks out past the top bar of frame 3.

Green Hive

Frame 3 was heavy with honey and frame 4 was the first to have brood on it.  Typically the brood nest is toward the middle of the hive so it was no surprise to see frame 5 had a lot of brood on it.  The other side of this frame had a large empty area where all the baby bees had already hatched out of their cells.

Hatched Brood

Frame 6 looked very similar to 5.  Frame 7 was about 50% covered with capped brood and had a large section of new wax drawn out.  Looking closely I could see there were eggs in almost every cell in the new section of wax.

Frame 7

Frame 8 and 9 actually had some large patches of brood on them with an empty queen cup as well.

Queen Cup

Thankfully there wasn't anything in the cup so it doesn't look like they are preparing to swarm or replace the queen.  The last frame hadn't really been touched by the bees since the last inspection.  So in total there are still 3 empty frames in Green Hive.  Looks like I'll be ready to add another box during my next inspection.  They are coming along nicely!

White Hive:

The first thing I noticed after removing the inner cover of White Hive was that I could see bees looking up from between almost every frame!  This hive in increasing in numbers more quickly than Green Hive for sure.

Looking into White Hive

The bees had stored quite a bit of nectar and pollen and the brood nest started a few frames in.  The queen in this hive knows how to lay some eggs!  Look at the photo below.  This frame is wall to wall brood with very few empty cells.  They will be bursting at the seems very soon.  I will need to add a second box for sure next week!

Lots of future bees

You can also see the patch of drone brood that was built along the bottom of this frame.  And speaking of drones, I was able to witness one being born.  Very cool!  You can watch the 30 second video here: http://youtu.be/X1rwGvIbuck

The last thing I did before concluding the inspection, was to change the entrance reducers on both hives from the small opening to the medium sized opening.  The population should be steadily increasing now on both hives so they should have no trouble defending a larger entrance.  This will also help alleviate any congestion as the foragers come and go all day long.

Looks like I have a lot to prepare for the next inspection.  New boxes to add and hopefully another way to power my Arduino.  So, until then thanks for reading!

First Inspection of the year : 2014-06-01

Twenty one days since I installed my two packages and I finally opened the hives up to take a look.  I should have done so much sooner but it sure seems like everything needs to be done all at the same time during the late spring.  It is always exciting to dive in and see what the girls have decided to do inside the hive despite the guidance the beekeeper has given them!  Bees don't read beekeeping books to figure out what they are suppose to do  =)

Green Hive:

The one nice thing about the inspections early in the year is that there aren't as many bees as there are during summer.  It makes it much easier to pull frames and move things around when there aren't bees covering everything.  You also don't need to use as much smoke since a few puffs can easily get most of the bees to move.  I was able to pull the first three frames quickly since the bees hadn't even touched them.  They are foundationless frames, so they are completely empty and the bees haven't thought about drawing out new comb on them yet.  I reached frame 4 and I could see the beginning of the honey and pollen storage. 

First inspection of Green Hive

Frame 5 had more pollen and honey and frame 6 was the first brood frame.  Interesting pattern on this frame with bits of pollen scattered among the brood cells.  About a third of the frame (on the right side of the photo) was all drone brood.

Brood frame

A little spotty so far but not something I'm too concerned about at this point.  It can be common in new queens.  I'm happy the queen is raising brood and she is fertile enough to have worker brood.  Next frame over was almost identical with drone on one side and worker brood on the other.  I spotted a queen cup but it was empty.  It is not uncommon to see queen cups.  The bees like to make them just in case they need them.  Frame 8 had some new, white comb drawn by the bees and they were starting to bridge it over into the next frame.  This is one of the struggles of letting the bees build their own comb.  They don't always build it in perfectly straight sections.  I cut some of the comb out and mashed some more together to try and make it straight.  I also swapped frame 9 with 8 in the hopes that they would make the small amount of comb there straight.  The last frame was empty. 

I did not spot the queen and I didn't specifically see any eggs but they seem to be going along pretty well.  As long as I see some new larva during my next inspection, I'll know the queen is still there.

So, besides doing my first inspection on Green Hive, I was also ready to deploy my Smart Hive Arduino system I have been working on.  It was a bit of a pain to run the one sensor through the inner cover without having someone to hold it but I was able to position it between frame 5 and 6.  Now I can only hope the bees don't chew through the wire insulation or decide to build bridge comb all around it and make a mess.  The second sensor goes out the side vent hole to measure the outside temp and humidity.  The third sensor rests near the Arduino in the vent board.

Arduino deployment

I'm looking forward to posting the first data points in my next blog entry!!

White Hive:

 The frames in the White Hive are fully drawn out plastic Honey Super Cell frames.  They fit much tighter in the box than the wooden frames in Green Hive do.  I have a "J-Hook" hive tool and it really helps to pull that first frame out.  A few bees danced across the frame I removed and I began to pull the second frame out.  For some reason, I did a mental double take and picked the first frame back off the ground where I had set it.  My eyes popped open when I realize there was the queen!!!  Running around on the frame with only a handful of other bees there!  Very unusual since the queen usually has a group of bees around her taking care of her needs at all time.  I quickly picked the frame up and hovered it back over the middle of the hive until I saw her walk off the frame and back down into the box.  That could have been bad if she had walked off into the grass or dirt somewhere!

The next two frames were empty like the first but on frame 4 I found the first scattering of brood.

Drone comb on plastic frames

On the bottom of this frame you can see that the bees decided to build some comb off of the bottom of the plastic frame.  Since the bees cannot enlarge the plastic cells, they have to build spots of comb with cells large enough for the queen to lay drones in. The next frame had a little brood on it and some nice colored pollen in the upper cells........plus the queen I almost squashed earlier!

Hi queenie!

Can you spot the queen the frame?  Starting from the middle bottom, about a third of the way up, just a bit to the right of center she sits in all her glory.  I pulled the next frame and was pleased to see it was solid brood!  A really nice pattern with very few cells still empty.  To my surprise, the next two frames were packed with brood too!  Wow!!  This queen is really a good egg layer.  I pulled frame 9 and it looked almost entirely empty until I held it up with the sun at my back.  When the light revealed the bottom of the cells, they were filled with tiny eggs.  This hive is going to be booming in a short period of time with this queen!

It is looking like a nice start to the 2014 beekeeping season.  The first new bees should start hatching any day now so the currently diminishing population of bees will make a nice turn the other direction building up to the hive's peak population in the summer.

Until the next inspection report, thanks for reading!