Bee Blog Slacker: 2014-09-20

Well a lot has happened in the bee world since my last post in June.  I guess things get crazy here in Michigan during the summer time when it seems so short but that is no excuse!  Thank you to my lovely daughter for reminding me that people are worried about the bees and they are left in suspense if I don't write these posts.....heheheheh  =)

Here is a quick summary of what has happened since:

Green Hive:  

Doing OK but not strong.  Had some queen drama where I found no brood in the hive during an inspection on 7/24 and found capped queen cells in White Hive.  I transferred the capped queen cells to the Green Hive and after looking through the photos I took during the inspection I spotted that there was a queen in Green Hive after all!!!  So either the queen in Green Hive was a virgin or not laying eggs for some other reason.

White Hive:  

Strong compared to Green Hive for sure.  This hive may have swarmed since I spotted all the capped and uncapped queen cells.  Usually they build swarm cells along the bottom of the comb so this does follow that pattern.  If they did swarm then about half of this colony is hopefully living in a cozy tree somewhere!

Lots of capped Drone brood and a few queen cells

So now fast forward from then end of July and into the end of September (that sounds really depressing actually).  I just did a full top to bottom inspection of Green Hive and I checked the honey super on White Hive to see if it was ready to come off.

Green Hive: 

The top box had about 4 totally empty frames.  It is too late in the year now for the bees to have enough incoming nectar to make wax.  So they will stay empty for the rest of this year.  There was one frame of solid honey and the rest of the frames had a mixture of honey, nectar and bee bread.

What the heck is bee bread you ask?  When bees bring the pollen back to the hive, another worker bee packs the pollen into a cell and adds some honey or nectar and enzymes to it.  This causes some fermentation to occur and breaks the pollen down into a more consumable form for the bees.

Lots of maroon colored bee bread on this frame

Compare the color of the bee bread to the color of the fresh yellow pollen on the back of this bees leg in this photo:

This bee bread is the primary source of food for developing brood.  Since this hive doesn't have any brood, they have a lot of bee bread stored.

The bottom box has only two empty frames and most of the remaining frames are packed full of bee bread or honey with very few empty cells.

Solid frame of honey

The bottom line for Green Hive is that they appear hopelessly queenless.  This late in the year there is really no possibility of buying a replacement queen.  I did check around online and every place I looked is sold out (and probably were sold out months ago).  Also, there is no hope of the bees having enough time to raise their own queen if I donated some eggs from White Hive.  It would take at least 16 days for a new queen to hatch.  By then it would be the middle of October and there would be no drones for her to mate with.  Matter of fact, during my inspection, I witnessed numerous drones being dragged out of the hive by their loving sisters.  I think the only option I have now is to combine this hive with White Hive (Newspaper Combine).  After I do that my remaining hive will go into Winter with FOUR deeps of food and bees.  No matter how bad the upcoming Winter is, that should be plenty to get them through it.

White Hive:

Even with the possibility that this hive swarmed earlier, it is still a strong hive.  They have managed to fill about half of a honey super.  Not great but better than nothing.  I plan to take this honey off when I combine Green Hive with this one.  I might be able to get 1 gallon of honey from this box.

What's Next:

I'm planning on doing the combine, removing the honey and doing a mite sampling tonight.  If I have enough time I'll extract the honey this weekend.  The next blog post will be up shortly!

As always, thanks for reading!

Mistakes Were Made: 07-21-2013

Sunday was a great day to work the bees for a number of reasons.  First off, my son-in-law Chris and my daughter are visiting from California and he wanted to dive into the hives with me!  Second, the weather was just perfect.  Temps in the 70s, clear and sunny.  If any of you other beekeepers out there are anything like me (and I'm sure you are), then you love teaching others about bees.  This was a great opportunity, even though I didn't expect to be able to show Chris any stages of brood development (see the last two posts).  As you are about to read, this was not the case!!

Since the split and insertion of the two queen cells during my last inspection, my plan was to get in and first check to see if they have hatched.  Hopefully I could spot a virgin queen running around in the process.  I already know that the split hive has significantly less bees in it, as there is very little activity at the hive entrance.  Because of this, I also planned on either moving a frame of bees into the split hive or just shaking them off the frames and into the split hive.  With plan in place, Chris and I suited up, lit the smoker and headed out to the split hive.

Split Hive:

This was going to be a good training and teaching hive because there were not going to be a lot of bees and it would be much easier to point things out.  Plus, not having a bunch of bees flying around your head is a bit less intimidating for someone's first time.  We opened the hive and I was able to go through the honey super pretty quickly.  There were only a few bees there and solid honey frames all look the same after seeing  a few.  I removed that box and started digging through the brood box, eager to get to the frame with the queen cell on it!  After prying back the fourth frame, I could see the bottom of the queen cell was opened so the queen was out somewhere!  We removed the queen cell and started in on the next frame and BAM there was the hatched virgin queen!  I pointed her out to Chris and in the 10 seconds it took to get the camera out to grab of picture of her........she as gone.  I flipped the frame over and back again a few times and she was no longer there.  She must have gotten spooked and flew off.  Camera shy I guess.  We went through the rest of the frames and we found a bunch more honey, but I was concerned that I didn't find any stored pollen.  That might be OK for the moment, but if the virgin queen does fly out and mate, comes back and starts laying eggs, there had better be some pollen in there to feed the baby bees!  We put the honey super back on the hive and put the inner cover back on.  I left the telescoping cover off at this point in case the queen came back she could get back in the hive a bit easier.  On to White Hive.

White Hive:


We opened up this hive and there were a lot more bees here as expected.  After a bit more smoke into the hive (Chris was my head smoker and picture taker) we dove in and quickly went through the honey super and set it to the side.  After a bit of coaxing I was able to get the first frame out and begin the inspection.  With the first few frames inspected, I was really pleased to see some pollen and "bee bread" packed into the cells.

After inspecting the next few frames, we came across a frame that had a bunch of drones and a queen cup on it.

I love spotting drones, especially when I am trying to teach someone about bees.  They are easy to distinguish because their large size and big eyes stand out so much.  Can you spot the drones in this picture?  There is a hole close to the middle of the frame with two drones above it and a queen cup to the right. 

I checked inside the queen cup just to make sure there was nothing in it, and there was nothing in there.  I continued on and began checking the next frame in line.  I slowed down a bit since the closer I was to the frame with the queen cell, the higher the probability that I would be able to spot the emerged virgin queen (if she was there at all).  I pulled the frame with the queen cell and sure enough, she had hatched.  The bottom of the cell was open and hopefully she was running around inside the hive.  I proceeded to move the frame out of the way and pulled the next frame out and I find..........BROOD?!?!?!  What??

At first I thought it must be all drone brood and perhaps I had laying workers but after seeing this on the next two frames and spotting a few actual drone cells, this must be worker brood.  How is this possible?  Well, the answer is that I screwed up.  I must have missed the eggs and larvae in these frames during my last few inspections and/or I simply didn't pull the frames that had the brood on them, so I never spotted it.  So now what?  I would think that if there is a laying queen in this hive, that she would have instantly killed the virgin queen inside the queen cell.  This wasn't the case because the virgin hatched out and was not dead inside the cell.  Perhaps the laying queen didn't spot the queen cell until after the virgin hatched and they eventually found each other and fought to the death?  Which one survived?  By this time I am scrutinizing every inch of each frame trying to find either queen.  I pull the next frame and I spot this....

If you look closely, not only are there two queen cups here, but this time they are full of royal jelly and I can spot a larvae in one of them (no doubt there is a larvae in the other one as well).  What the heck is going on?  If there is an existing laying queen, why were the bees trying to create a new queen?  If there are larvae in these queen cups, then that means they are somewhere between 4 and 8 days old (http://www.bushfarms.com/beesmath.htm) right around the time I placed the queen cell in this hive.  Coincidence?  I think I need to give Sherlock Holmes a call because I can't quite sequence the timing and all the possibilities together to form a rock solid answer to what is going on.  Usually, queen cells built in the center of the frame like this are considered Supercedure cells.  This means the bees have decided that the old queen is beginning to fail and they have determined to replace her.  Maybe that is what was going on and my timing was just really bad?  Who knows?

We finished inspecting the remaining frames and failed to spot either the old queen or the virgin queen.  At this point there wasn't much left to do but close up the hive.  I did take two of the frames out and after closely inspecting them (and not finding any queens), I took them over to the split hive and shook the bees into it.  Hopefully that will give them a few more bees to supplement their numbers until the virgin queen mates and starts laying eggs to make new bees!

Hopefully, I will open the hive in another week and what I find will give more answers to the mystery.  All in all it was a very educational inspection, not only for "newbee" Chris but for me as well!! 

Thanks again for reading

Chris and Mark about to embark on an adventure!

Swinging for the Cheap Seats: 07-17-2013

I scrambled around the last few days trying to find a queen producer that actually had queens for sale.  I found a few places online that are still producing and selling queens but it seems that shipping them is pretty risky.  Who knows how much they'd get thrown around or squashed in transit or how hot or cold they would get!  Not to mention, shipping isn't cheap.........and I'm cheap.  I talked to a guy I work with and he suggested talking to the same person I bought my initial packaged bees from.  Duh!  So, I called Kline's and they didn't have any queens but they did refer me to someone that might.  I called that guy and he was sold out BUT he did have some queen cells AND he lived right in between where I live and where I work!

For those of you unaware of the differences and risks involved, basically you can buy a mature queen that is mated and actively laying eggs and you can introduce her into your hive via a cage and over the course of a few days the bees in the hive will accept her as their new queen.  Once this happens you can release her from the cage (otherwise the bees would kill her).  With a queen cell, it is an unhatched, virgin queen.  This means you can just put the cell in the hive and she will hatch out in a few days and smell like all the other newly hatched bees.  But she is a virgin and will then have to fly out and mate and then return to the hive.....all without getting eaten by a bird or smacking into a car windshield.

Since I'm kind of in a bind being queenless and I don't want to take the risk of shipping (and extra time waiting for shipment), I decided to go with the queen cells.  To mitigate some of the risk, I bought two.  My thought was that I would split my queenless hive and put one queen cell in each box.  In this way, if only one queen hatches and mates successfully, I could easily re-combine the two hives back into one.  Or, I could even move frames of brood from the new queen hive to the queenless one and eventually have them raise a new queen.  Worst case scenario is that both queen cells do not produce a mated queen.  Best case is that both do.

Temperatures were forecast to be in the mid 90s, so I went early in the morning to pick up the queen cells.  The guy was great and showed me around his entire operation.  He showed me all his hives and had me suit up so he could show me his queen builder colonies and how he did his grafting and queen rearing.  Very cool stuff!  The only bad thing is that is was 11 AM and already 88 degrees by the time I left.  Once I was home, I think it was about 92 degrees and I was not excited to put on my bee suit.  I put out some cinder blocks and a hive bottom board and began to split the hive.  Honey super and top brood box off.  Bottom brood box off and carried over to the new hive bottom board.  Hive tool moves two of the middle frames apart, hold the queen cell in and push the two frames back together.  Put a honey super on that was partially filled from last year and close up the new hive.  Back to the old hive, put the brood box on the hive bottom board and in goes the queen cell.  Honey super back on and close it up.  All told I think it took me 15-20 minutes but I think I must have lost about 50 pounds sitting in my bee suit baking in the sun.  Ugh.  I finished up by putting some grass clipping on the landing board of the new hive to cause the bees trying to leave the hive to re-orient themselves.  This will hopefully prevent them from returning to the location that they remembered as home........the old hive location.

Now the waiting begins.  The cells should hatch in a day or two (assuming there are alive queens in those cells).  The new queens will emerge and take a few days to relax and get to know everyone.  Then they will begin their mating flights.  The latest studies show that a virgin queen will mate with 15+ drones before returning to the hive to begin her reign.  So, within the next approximately two weeks I should find brood in the two hives.  Don't hold your breath until the next inspection, I'm already holding mine!

Thanks again for reading.

Strike Two: 07-09-2013 and 07-13-2013

Looks like my hive may be in big trouble.  I made my second attempt to split the hive and even though I had better weather, the bees still seemed agitated.  Last time I had looked, the top box was almost entirely full of honey.  When I opened the hive this time, I took the top box off first and started my inspection of the bottom two boxes.  I went through both bottom boxes (while trying not to pass out in a full bee suit and 85 degree weather) and I found nothing but pollen and honey!  What?  During my last full inspection (over a month ago now), the second box had lots of brood and I had spotted the queen.  This time I don't see any?  Well, there is no possibility to split the hive if there is no brood or eggs (if I want them to make their own queen).  I finished looking through the bottom box and the time was now after 9 PM so the bees were about to get even more annoyed once the sun went down.  I closed it up and began to ponder what had happened. 

07-13-2013:  Since I had skipped the top honey super (and I don't use queen excluders), I thought maybe the queen had gone back into the top box and I just didn't look there.  So, a few days later, I took a queen peek in the top box.  Honey, honey and more honey.  Dang, now what?  Could I have skipped a frame or two during my inspection and missed the brood?  That doesn't seem to make sense since that would be a very small area to have brood only on a few frames.  I saw no queen cells, so I don't think they swarmed.  The proportion of workers to drones seemed right, so the hive hasn't become a laying worker hive.......yet.  The last inspection where I spotted brood was on June 4th, so it has been more than 21 days, so the queen could have died and all the existing brood hatched out already.  By all my logic, it seems that they are now queenless and my only hope of saving them is to order a new queen.  Hopefully there is someone selling them this late in the year!

Smile Girls!