2015-10-25: Winter Prep

We've finally hit a few nights of freezing temps so that means it is time to complete any winter prep that needs to be done on the hives.  I have empty feeder jars that need to be removed, boxes with no stores in them that need to be taken off (the bees don't need a bunch of extra space that serves no purpose) and mouse guards to be placed on.  I also need to decide what to do with my newly established nuc hives.

Old Nucs - Yellow/Green hives:

These are the splits I made some time ago that were moved into full sized boxes last month.  They've been feed 2 quarts of syrup each in the hopes that they would draw the empty frames with wax and start filling them up.  If I found 10 good frames then I was thinking to take two nuc bodies (5 frames each) and stack them.  It is suppose to be easier for the bees to move up in the winter and it would be easier for the bees to cover 5 frames at a time instead of 10.

Yellow Nuc:

I had suspicions during the last inspection that I had waited too long to transfer this nuc to a full sized hive and they decided to swarm (I saw some torn open queen cells).  The bees seemed "flighty" and the only brood I saw were drones.  The number of drones walking around the frames was high, especially since they should all be kicked out of the hive by now!  I did spot some eggs and developing larva but something was telling me that this was not right. 

Drones, lava and eggs but no queen

So, either I have the start of laying workers or I have a queen laying all drones.  On top of that, the bees had not touched a single new frame that I had placed into the hive.  Stay tuned for more on the Yellow Nuc during my inspection of the Green Nuc....

Green Nuc:

I was a bit annoyed after pulling the first few frames since the bees had not touched them at all.  Thankfully the original 5 frames that were moved into the hive looked pretty good.  Lots of capped honey and worker brood!  Two more frames in and I spotted the queen with her pretty green dot. 

Queen with a pretty green dot

I was even nicely surprised that after I moved past these 5 frames the bees were actually drawing out one of the new frames! 

Drawing out a frame with new wax

Have I mentioned how I love festooning bees before?  =) 

Festooning bees

 Based on my findings between both nucs, I decided the one was probably queenless and had the start of laying workers and the other was queen right.  I thought it would be a good idea to take two 5 frame nuc boxes and stack them with the best frames from each hive.  I unscrewed the bottom from one of the nuc boxes and stacked it on top of another nuc box.  Crap!  They are not made to stack.  There was a large gap between the two that would be open to the air.  Ugh.  I guess I need to deal with the full sized boxes instead.  I decided to do a newspaper combine and thankfully I had one sheet of newspaper left!  I placed it across the top of Green nuc, picked up the Yellow nuc off of its bottom board and placed it on top of the Green nuc.  The bees will eventually chew through the paper and this slow integration will hopefully prevent any fighting between the bees before they merge together into one happy family.  I'm just hoping that there wasn't some drone laying queen that I didn't spot in the Yellow nuc that ends up battling with Green nuc's queen.

Newspaper combine complete

Where did that orange pollen come from?

Yellow Hive:

This is my cutout hive that has made some really good progress over the summer.  I removed the empty feeder jar and took a look through the top box.  The bees were covering about 6 frames and had most of them drawn out. 

Yellow Hive bees

Quite a few were filled with capped honey.  Looking down into the box below I saw lots of bees and some rubber bands still on the frames from the cutout!!  They typically chew through them and dispose of them but I'm guessing they've propolised them right onto the frames now.  I'll have to remove them during the first inspection in the Spring.

Green Hive:

The top honey super on this hive was filled with drawn combs that were completely empty.  I thought for sure that when I added them that the bees would fill them quickly with the Goldenrod flow.  No such luck.  I pulled this box off after clearing a few stray bees off the frames.  I pulled a few frames from the next honey super and at least there was some capped honey there.  Looks like that box will stay on for the Winter.

White Hive:

Looking at the top honey super on this hive I could see that it was packed.  I knew this from my last inspection but I had also seen a large pile of dead bees in front of the hive.  I was concerned that this hive had been robbed out by other bees.  Well not a single frame of honey appeared to be touched so this hive should have some great stores going into Winter.  It also had a nice population of bees and when I looked closely at the pile of dead bees I saw numerous dead yellow jackets in the pile.  Maybe they tried to raid the hive and picked the wrong one to screw with!

Battle aftermath

To complete my tasks I needed to put the mite sampling boards back into the hives that had screened bottoms to prevent any wind drafts blowing up from the bottom of the hives.  With that done I also wanted to put my mouse guards on but with the entrance reducers on it didn't really look like they would fit properly.  Based on http://www.honeybeesuite.com/what-size-hardware-cloth-is-best-for-beehives/ it looks like #4 hardware cloth is the proper size for a mouse guard.  So I think I'll grab some and use that instead.

I'm also considering getting or building some candy boards that come with a top entrance.  This would allow the bees to leave the hive for a cleansing flight during the Winter if the bottom entrance happened to be plugged up with dead bees.

With four hives going into Winter and some diversified genetics (one Italian, one cutout wild open mated and two "northern" queens), I'm hoping to have some better luck overwintering this year.  Wish for a mild Winter and wish the girls luck!

Until next time, thanks for reading!

First Full Inspection: 2015-05-13

The 2015 Beekeeping season is now officially in full swing!  I've done my first complete inspection of both hives and things are looking good so far.

White and Green Hives.  Life long buddies.

White Hive:

Upon opening the hive up, the first thing I found was that instead of hanging out in the middle of the hive, they've chosen one side over the other.  It must smell better over there or maybe there was more honey and pollen left on those frames from last year?

The Left side is where the cool kids hang out

Anyway, it made it easy to figure out which side to start my inspection on.  So I pulled out the frames on the empty side and quickly worked my way toward the middle.  On frame 6 I found a nice frame of fresh, colorful pollen.

Pollen

Some pretty typical orange and yellow colors for this time of year.  I was hoping that the bees would have a chance of gathering some steel blue colored pollen from the Siberian Squill I planted but the blooms were already spent by the time the bees arrived.  Maybe next year.

Moving on to frame 7 I spotted the first frame of capped brood.

Future baby bees

It has only been about 14 days since the bees were installed and usually it takes a few days for the queen to be released from her cage, and then maybe a few more days before she even starts laying eggs.  The eggs hatch into larvae and then the cell is sealed on day 9.  So, I'm guessing these cells have only been capped for a few days at most.  If that means the eggs were laid 12 days ago, then in 9 more days they will start hatching.  Then we'll get to see what this queen's genetics are going to look like.  This hive has been a bit more "touchy" than the Green Hive so far.  Hopefully when the new bees take over they will have a little calmer disposition.



Green Hive:

I love the look of new comb on foundationless frames!  Green Hive did not disappoint me either.

New comb being formed

It is fascinating to watch as the bees drawn down a sheet of hexagons on the frame.  The new wax is a nice pale yellow color and it is just waiting to store something!

Well, this queen has been filling the frames with brood.

Pretty solid brood

Sometimes new queen have a very spotty brood pattern when they first start.  This frame looks pretty good to me.  You can also see that there is a cluster of drone brood along the bottom of this frame.  Right before I took this picture the bees were doing there job, covering the frame and keeping the brood warm.  If you blow on them, they don't like it and they move out of the way rather quickly.  I think it has something to do with the CO2 that we exhale.

A few frames over I was able to grab a nice close up of the developing larva.

"C" shaped larva

Notice the different sizes of the larva.  The queen usually lays her eggs in a circular spiral pattern.  So the larva in the center of the frame are bigger (older) and the ones toward the outside edge are smaller.  If you zoom in really close on this photo you can even see the eggs to the right of the smallest larva.

I'm really glad to see both hives getting off to a really good start so far in 2015!

Next Steps:

I have completed my solar Arduino setup and I plan on deploying that again soon.  I also plan on taking some of the remaining honey frames from the hive that died this past winter and feeding it back to the bees.

Until next time, thanks for reading!

Guest Beekeeper : 2014-06-25

One of the fun things about beekeeping for me is teaching others about bees.  I have found many seemingly willing students.  Or at least ones that feign interest while I blab on and on about the bees.  I have also tried to get as many of these people as possible into the beehives.  For this inspection, I was fortunate enough to have Byron be my guest beekeeper.  It sure doesn't hurt to have an extra set of hands either!

My main concern for this inspection was to make sure the bees hadn't run out of room, since each hive consisted of only one box.  At this point they should be covering most of the frames and be ready for a second box to be added.  I was also hoping I hadn't waited too long and they weren't preparing to swarm!

Green Hive:

I took my time going through this hive since I wanted to be able to show Byron all the facets of beekeeping.  How to separate and manipulate the frames.  How to use the smoker and hive tool.  And what to look for in the hive: nectar, pollen, honey, eggs, larvae, capped cells, workers, drones and the queen.  The bees had just started to draw wax on the first two frames in the hive so I was able to show him how they create the wax in an empty frame.  He was also able to see the festooning behavior of the bees as they constructed the new wax comb.  The queen in this hive remained elusive and we did not spot her.  Although we did see some eggs and very young lava so she was there somewhere.  A second deep box of empty frames is now on this hive.  I have a feeling I should have used a technique called pyramiding to encourage them to move into the new box.  If they haven't done so by the next inspection I will make it so.

White Hive:

This hive had a second box added with some frames from the hive that died this past winter.  Some were empty brood frames and some were filled with honey.  Since this hive appears stronger, the bees were already working these frames.  After going through these I let Byron take over the inspection.  I'm sure it was his observation of my fantastic abilities that allowed him to jump right in like a pro!!  LOL

Byron inspecting the hive

The queen in this hive seems incredible to me.  She has solid brood patters across almost every single frame.  This hive will sure need the room in that second box!

Lots of brood

Even more brood

I never get tired of seeing new bees being born and emerging from their cells.  This inspection was no disappointment when we spotted 3 drones being born at the same time!

Welcome to the hive boys

After Byron had pulled 8 frames I thought for sure I was going to strikeout in showing him the queen.  But when we pulled frame 9 there she was!

Smile Queeny!

After watching her run around for a bit, we completed the inspection and closed up the box.

All in all, both hives are doing well and it was a great evening for an inspection.  Next inspection I will hopefully see that the queens have moved up into the second box and started laying eggs there.  I'm also planning on creating one or two nucleus hives and buying a "northern" queens to put in them.  At worst, this will allow me to have some backup hives in case one of the hives fails.  At best they will become fully established hives with better genetics for surviving these horrible Michigan winters!

Until next time, thanks for reading!

Second Inspection: 2014-06-10

I was very eager to complete this second inspection for a few reasons.  First, I was very eager to retrieve my fist set of Arduino Smart Hive data!  Second, the hives are currently at Installation +30 days (Bee Math) and there should be many more young bees in the hive.  Not only will these bees be nurses for the next generation, but they will also be wax comb builders (Honey Bee Worker Jobs).  So, they should be expanding the nest area and allowing more bees to forage for nectar and pollen.  The increasing number of bees also means they will be running out of space soon.  Normally in nature, the size of the cavity the bees live in does not increase and when they run out of room they swarm.  Part of being a beekeeper is controlling the bee's swarming nature by adding more space (boxes) and I needed to see if it was time to add another box or not.  If your hive does swarm you've lost probably half of your bees and your old queen.  Not a good thing if you actually want any honey.  Plus most of your neighbors probably wouldn't appreciate a swarm of bees landing in their yard!  Well, onto the inspections...

Green Hive:

I opened the lid and found that my ventilation board with my electronics in it was nicely stuck to the top of the lid.  There must have been some propolis left on the underside of the lid and it works really nicely as glue.  I spent a few minutes trying to remove the ventilation form and when I finally removed it, I notice a LARGE, furry black spider resting comfortably on the underside of the lid.  Thankfully I was armed with a steel hive tool and dispatched the menace quickly.  I really dislike spiders but I also know they do eat "bad" insects, so I try to leave them alone when I spot them in the garden.  But when they are around my bees I show now mercy!  I'm sure beekeepers in Arizona, Florida or Australia can get some really nasty surprises around their hives.  Yikes. 

Anyway, after all that drama, I pulled the SD memory card from the Arduino and downloaded the data.  My first disappointment was that it appeared that it only logged about 3 days worth of data.  It appears my 6 AA battery pack didn't last very long at all.  I'll be looking into an alternate power source for sure now.

Arduino Smart Hive data

With that said, it was cool to see that the general data collection does work!  From the data it looks like the external sensor might be a little flaky since the humidity spiked at 100% a number of times and the temperature measured at 103.82 F on June 2, 3:22 PM.  According to the weather report on that day, the highest it hit was 82 F.  Other than that oddity, the data looks consistent.  What I really like seeing are the readings from the brood area.  The temperature reading is a very flat, steady line, right around 95 F.  Despite what the outside temperature is, they do a fantastic job of maintaining the same temperature and humidity levels where the baby bees are being raised.

Pulling the first two frames from the hive, I saw they were still empty.  The third frame in was built much wider because of the empty space next to it.  With the top down view in the photo below, you can see how the wax sticks out past the top bar of frame 3.

Green Hive

Frame 3 was heavy with honey and frame 4 was the first to have brood on it.  Typically the brood nest is toward the middle of the hive so it was no surprise to see frame 5 had a lot of brood on it.  The other side of this frame had a large empty area where all the baby bees had already hatched out of their cells.

Hatched Brood

Frame 6 looked very similar to 5.  Frame 7 was about 50% covered with capped brood and had a large section of new wax drawn out.  Looking closely I could see there were eggs in almost every cell in the new section of wax.

Frame 7

Frame 8 and 9 actually had some large patches of brood on them with an empty queen cup as well.

Queen Cup

Thankfully there wasn't anything in the cup so it doesn't look like they are preparing to swarm or replace the queen.  The last frame hadn't really been touched by the bees since the last inspection.  So in total there are still 3 empty frames in Green Hive.  Looks like I'll be ready to add another box during my next inspection.  They are coming along nicely!

White Hive:

The first thing I noticed after removing the inner cover of White Hive was that I could see bees looking up from between almost every frame!  This hive in increasing in numbers more quickly than Green Hive for sure.

Looking into White Hive

The bees had stored quite a bit of nectar and pollen and the brood nest started a few frames in.  The queen in this hive knows how to lay some eggs!  Look at the photo below.  This frame is wall to wall brood with very few empty cells.  They will be bursting at the seems very soon.  I will need to add a second box for sure next week!

Lots of future bees

You can also see the patch of drone brood that was built along the bottom of this frame.  And speaking of drones, I was able to witness one being born.  Very cool!  You can watch the 30 second video here: http://youtu.be/X1rwGvIbuck

The last thing I did before concluding the inspection, was to change the entrance reducers on both hives from the small opening to the medium sized opening.  The population should be steadily increasing now on both hives so they should have no trouble defending a larger entrance.  This will also help alleviate any congestion as the foragers come and go all day long.

Looks like I have a lot to prepare for the next inspection.  New boxes to add and hopefully another way to power my Arduino.  So, until then thanks for reading!

First Inspection of the year : 2014-06-01

Twenty one days since I installed my two packages and I finally opened the hives up to take a look.  I should have done so much sooner but it sure seems like everything needs to be done all at the same time during the late spring.  It is always exciting to dive in and see what the girls have decided to do inside the hive despite the guidance the beekeeper has given them!  Bees don't read beekeeping books to figure out what they are suppose to do  =)

Green Hive:

The one nice thing about the inspections early in the year is that there aren't as many bees as there are during summer.  It makes it much easier to pull frames and move things around when there aren't bees covering everything.  You also don't need to use as much smoke since a few puffs can easily get most of the bees to move.  I was able to pull the first three frames quickly since the bees hadn't even touched them.  They are foundationless frames, so they are completely empty and the bees haven't thought about drawing out new comb on them yet.  I reached frame 4 and I could see the beginning of the honey and pollen storage. 

First inspection of Green Hive

Frame 5 had more pollen and honey and frame 6 was the first brood frame.  Interesting pattern on this frame with bits of pollen scattered among the brood cells.  About a third of the frame (on the right side of the photo) was all drone brood.

Brood frame

A little spotty so far but not something I'm too concerned about at this point.  It can be common in new queens.  I'm happy the queen is raising brood and she is fertile enough to have worker brood.  Next frame over was almost identical with drone on one side and worker brood on the other.  I spotted a queen cup but it was empty.  It is not uncommon to see queen cups.  The bees like to make them just in case they need them.  Frame 8 had some new, white comb drawn by the bees and they were starting to bridge it over into the next frame.  This is one of the struggles of letting the bees build their own comb.  They don't always build it in perfectly straight sections.  I cut some of the comb out and mashed some more together to try and make it straight.  I also swapped frame 9 with 8 in the hopes that they would make the small amount of comb there straight.  The last frame was empty. 

I did not spot the queen and I didn't specifically see any eggs but they seem to be going along pretty well.  As long as I see some new larva during my next inspection, I'll know the queen is still there.

So, besides doing my first inspection on Green Hive, I was also ready to deploy my Smart Hive Arduino system I have been working on.  It was a bit of a pain to run the one sensor through the inner cover without having someone to hold it but I was able to position it between frame 5 and 6.  Now I can only hope the bees don't chew through the wire insulation or decide to build bridge comb all around it and make a mess.  The second sensor goes out the side vent hole to measure the outside temp and humidity.  The third sensor rests near the Arduino in the vent board.

Arduino deployment

I'm looking forward to posting the first data points in my next blog entry!!

White Hive:

 The frames in the White Hive are fully drawn out plastic Honey Super Cell frames.  They fit much tighter in the box than the wooden frames in Green Hive do.  I have a "J-Hook" hive tool and it really helps to pull that first frame out.  A few bees danced across the frame I removed and I began to pull the second frame out.  For some reason, I did a mental double take and picked the first frame back off the ground where I had set it.  My eyes popped open when I realize there was the queen!!!  Running around on the frame with only a handful of other bees there!  Very unusual since the queen usually has a group of bees around her taking care of her needs at all time.  I quickly picked the frame up and hovered it back over the middle of the hive until I saw her walk off the frame and back down into the box.  That could have been bad if she had walked off into the grass or dirt somewhere!

The next two frames were empty like the first but on frame 4 I found the first scattering of brood.

Drone comb on plastic frames

On the bottom of this frame you can see that the bees decided to build some comb off of the bottom of the plastic frame.  Since the bees cannot enlarge the plastic cells, they have to build spots of comb with cells large enough for the queen to lay drones in. The next frame had a little brood on it and some nice colored pollen in the upper cells........plus the queen I almost squashed earlier!

Hi queenie!

Can you spot the queen the frame?  Starting from the middle bottom, about a third of the way up, just a bit to the right of center she sits in all her glory.  I pulled the next frame and was pleased to see it was solid brood!  A really nice pattern with very few cells still empty.  To my surprise, the next two frames were packed with brood too!  Wow!!  This queen is really a good egg layer.  I pulled frame 9 and it looked almost entirely empty until I held it up with the sun at my back.  When the light revealed the bottom of the cells, they were filled with tiny eggs.  This hive is going to be booming in a short period of time with this queen!

It is looking like a nice start to the 2014 beekeeping season.  The first new bees should start hatching any day now so the currently diminishing population of bees will make a nice turn the other direction building up to the hive's peak population in the summer.

Until the next inspection report, thanks for reading!

Performance Anxiety: 09-02-2013

White Hive has been closed up and left alone since the last inspection on 8/6, almost a full month ago.  The last few times I walked by the hive I have seen an ever increasing number of bees flying in and out so my hope is that the new queen is performing well!  Knowing that there were larva and eggs during the last inspection, there should have been plenty of bees that have been born since.  Going back to our trusty "bee math", an egg laid today will hatch into a worker bee in 21 days.  It has now been ~25 days and since a queen can lay around 2000 eggs in a day, that is a lot of new bees!  Well, what is suppose to be and what is are two different things.  The only way to see for sure it to open it up.

I had some help with the inspection this time when my friend Casey came over to give me a hand.  It is always beneficial to have an extra set of hands to hold frames, take pictures, use the smoker, etc.  Plus, I love teaching others about bees.  Especially when they are as excited as I am about them!

If you recall from the last inspection, I had added a second brood chamber onto White Hive.  Now it consists of two brood chambers and one honey super.  Since the second brood chamber was totally empty, I eagerly checked to see if the bees had begun to use it.  When I opened it up, the bees were covering 5 frames in the center of the box.  That is a pretty good sign right away.  I only moved in about 3 frames and spotted the queen on a frame of mostly capped brood!

Awesome!!  It is great to be able to spot the queen but even better when you get to show someone else!  I also noticed quite a few grey colored, slightly shriveled looking, fuzzy bees.  I believe those are the bees that have recently hatched.  They take a few days for their exoskeleton to harden and then they begin their first duties.  It usually takes around 22 days before a bee even leaves the hive for the first time!

Want to learn more?  Check out these links:
Honey Bee Jobs
Worker Bee Activities

If you ever see a honey bee buzzing around one of your flowers, you know they are an "old" bee!  Sometimes you can even see that the tips of their wings look shredded.  A honey bee pretty much works herself to death during her 6 week summer life span.

Back to the inspection: After finding the queen I did find a few more frames there were almost completely SOLID brood!  This is a great sign as she is doing her job and laying eggs and making more bees.  It is really important that they are producing strong numbers this late in the summer since a lot of these bees will be the ones that begin the winter cluster.  More bees = more warmth during the winter!

This early in the inspection I have seen pretty much everything I needed to.  The rest of the time I used as a teaching opportunity.  There is so much to show and often times when you teach, you end up learning too.

As I closed up the hive and talked to Casey about what he had seen, it was pretty clear that he was gung-ho about becoming a beekeeper himself!  Catch the buzz!  =)

To complete this post, let me leave you with some sad evidence of the impending demise of summer:

Nothing says "fall" like Goldenrod in bloom.  This bumble bee was taking a nap on these flowers, enjoying the sun and warmth.......while it lasts.

Until next time, thank you for reading!

Anti Robin Hood: 08-06-2013

You've all heard of Robin Hood, who robs from the rich and gives to the poor, right?  Well, in the bee world, their hero is the Anti Robin Hood!  They rob from the poor and give to the rich and powerful!  This is the sight I beheld as I approached the split hive to begin my inspection.

Split Hive:

As I came upon the split hive I immediately noticed a cloud of bees swirling around the outside of the hive.  Instantly odd since the population was so low that even basic in and out traffic was not very prolific.  The other thing that was odd was the majority of the cloud of bees were attempting to enter the hive under the telescoping cover instead of the actual entrance.  These were all signs that the hive was in the process of being robbed.  When a strong hive finds a weak hive that cannot defend the supply of honey they have, then they overpower the guard bees and steal the honey.  Not a good situation since bees are killed during the fighting and the weak hive can either be greatly damaged or destroyed.

Here is a photo of what a honey frame looks like when it has been robbed.  The cells have been torn open during the frantic raiding and have a very jagged appearance.

Robbed Frame

I had placed the entrance reducer on the smallest setting when I first set up the split hive and I thought that would be enough.  Not only did I made a mistake by putting the split into a full sized deep box (instead of a 5 frame nucleus hive), but adding a second box of honey wasn't good either.  I set them up to fail by giving them way too much space to defend with way too few bees.  Learning from mistakes are the best lessons, right?

Upon opening the hive it was obvious to me that the only bees present were the ones robbing out the honey.  There was very little honey left in any of the frames and I quickly went through both boxes looking for any sign of the virgin queen that was spotted two inspections ago or any sign of eggs or larvae.  She was no where to be found and the small cluster of about 50 dead bees on the bottom board told me that if I did find her, she would probably be amongst the dead.  I combed through the dead bees and did not find her.  I did find a dead yellow jacket and a bee with its stinger and venom sac exposed.  No doubt, she died in battle.

With nothing else left to do with the split hive (or ex-split hive), I decided to add the now mostly empty brood box onto White Hive.

White Hive:

My goal this time with White Hive is to verify that what I thought might have been eggs really were freshly laid eggs.  As you may recall, I spotted the queen during my last inspection.  If she was from the queen cell I installed, I wouldn't have known for sure that she had flown out and successfully mated.  If I find eggs that tells me that she did.

The first few frames were honey with some pollen as I expected, but as I pulled frame 4 I hit the jackpot.

Larvae!

Since I know the "bee math" http://www.bushfarms.com/beesmath.htm, I know that when an egg is laid it takes 3 days to hatch, spends 6 more days as an open larvae before it is capped (total of 9 days) and then 12 more days before a new bee emerges (total of 21 days).  This photo shows big fat open (uncapped) larvae that will be capped any day now.  So they are probably somewhere between 6 to 8 days old and that places them as eggs during my last inspection on 7-30!  I love it when I can actually figure things out!

On the other side of frame 4 I was able to spot a baby bee emerging from her cell (dead center), some very tiny larvae (two cells down to the left) and what looks like a tiny grain of rice......an egg (one cell down to the left and another one two cells down to the right)!

Eggs and Larvae

Now that I know the Queen is laying for sure, I can stop worrying so much about White Hive.  She should really be cranking out those eggs, possibly 2-3 THOUSAND every day!  More than her own body weight!

Continuing on, I found what I think was one of the old Queen Cups that the bees decided they do not need anymore.  They look like they are in the process of tearing it down.

The remaining frames had more honey, pollen, open larvae, capped larvae and a small patch of drone brood that is just about to hatch on frame 7.  White Hive looks really good and with a new Queen going full bore, they should be very strong going into Winter. 

Speaking of changing seasons, I saw some Goldenrod in bloom.  That sure heralds the end of summer doesn't it?  Lame!

Until next time, thanks for reading!

Hive Inspection: 06-04-2013

It is always fun for me to be able to share my beekeeping experiences with people.  During this inspection I had a friend of mine along to help.  I also enjoy teaching "newbees" all about the different miracles in the hive.  This inspection allowed me a lot of opportunities to do so!

We saw pollen, nectar, capped honey, open brood, capped brood, drone brood, hatching baby bees, queen cups and the queen!  I'm not sure what else there would be in a hive that I would even want to show someone.  It is really hard to see eggs and I don't care to show someone Varroa mites!

I've come to realize that people judge the strength of their hive by how many frames the bees are actually covering.  So I made sure to take note of this.  As of last inspection, I knew the queen was in the top honey super after the long, cold winter and there was plenty of brood there.  I was hoping all the brood had hatched out (new egg to hatching = 21 days) and the queen had moved down into the bottom two brood boxes.  Well, I had half of it correct.  She has moved down and been laying in the bottom boxes but she must have also laid a few more eggs in the honey super as well.  Here is a really weird brood pattern because of this:

Not only is there uncapped nectar and pollen scattered around, but there are little pockets of brood here and there and a few drone cells along the bottom edge toward the right.  I was hoping all the brood would be out of there so I can use these frames for honey later in the year.  I could use this frame as a part of the split I plan to do in the next week or so.

One of the greatest things in the hive to witness is a new bee being "born" or emerging from its cell for the first time.  Watching them poke out and move their antennae around is amazing!  Look right in the center patch of capped brood and you can see two little heads poking through and looking around!

 The bees were only covering about 5 / 10 frames in the top box and most of the empty frames hadn't really been built out much.  So, onto the next box!

It took me a while to figure out how to get the first frame out without squashing a bunch of bees, but with a little smoke and hive tool manipulation, I was able to get it started.  On this frame I was very pleased to see a SOLID patch of open brood.  You can see right along the center of the photo a whole bunch of pearly white glistening larvae!  Nice!

I would suspect the queen is probably actively laying eggs somewhere in this box.  I was really hoping to spot her too so that I could show my friend the queen in all her glory.  On the very next frame I pulled out, there she was!

Can you spot her?  No?

How about now?

I know, they all look like "bees", right?  Well, if you still can't spot her, she is just slightly above dead center in the photo.  Her abdomen is darker brown and less striped looking.  Also, her abdomen sticks out way past her wings.  Hopefully you spotted her!

At this point in the inspection I decided not to go through every frame in the box.  And I decided not to go into the very bottom box either.  I had seen and shown all the really important things and the inspections always take longer than you'd like to think.  The bees were probably covering 8 / 10 hives so that box was pretty strong.  I closed the hive up and called it a day. 

I was happy to see that the queen was strongly laying in the lower box and that there were a few drone cells dotting the bottom of some frames.  I did not see any drones walking around but I'm sure they will be out within a few days for sure.  This is important because I intend to split the hive and have them raise their own queen.  A new virgin queen will need drones and if there aren't any around then she isn't going to be properly mated.  Not that she would mate with her own drones, but if you have drones in your own hive, then there are probably drones out in the wild too!

Next post I hope to be showing you my new split.  Until then, thanks for reading!

Hive Inspection: 08-21-2012

TBH:

Let us all bow our heads in silent prayer as we fondly remember the Top Bar Hive.  It was a good hive, filled with the expectant hope of new life and a bountiful harvest.  Alas, it twas not to be.  Let us not focus on how it died, but on how it lived.  <end sermon>

Well, as you can surmise, the TBH is kaput.  Deceased.  Passed on.  Gone to join the choir invisible.  Pushin up the Daisies.  It is an EX-TBH.  Sorry, bad mimicry of Monty Python's dead parrot sketch.  Anyway, I'm not 100% certain on the prelude to its demise, but something happened to weaken the hive and that allowed a bunch of wasps of various sorts to raid the hive, killing most of the defenders and the queen.

So, lets look on the bright siiiiide of life <whistle>:

• The bees were "free", since they were won at the Spring MBA conference.
• They added to the learning experience of the beekeepers
• I was able to purchase and apply a disease test kit for both American Foulbrood and European Foulbrood which both came up negative  <whew!>
• Since the bees will no longer be needing their honey, it was liberated

Opening the Foulbrood test kit

Removing a dead bee larvae

Test results.  If a line shows under the "T" it is postitive

Green Hive:

Thankfully, this hive is still going bonkers.  The bees have only barely started to draw out the wax on the second honey super I added, so at this point in the year I won't be expecting to harvest anything from this super.  Anything the bees store here before Winter, they will keep.

The first honey super I placed on this hive has almost every frame 80-90% of glorious honey capped!!  I was ecstatic to see this!  I have heard that you don't often get a harvest during your first year but it appears I will at least get a little bit from this hive!  Not really sure how much honey to expect from one super but I ordered two cases (12 each) of 9oz glass Hex Jars.  I guess if I fill them all I can always use Mason jars or some other container.

Lots of capped honey

I have also been surprised at the vast amounts of propolis the bees on this hive seem to make.  I guess I'm not familiar with the different varieties of honey bees, but the ones I have seem to make a lot!

Lots of sticky propolis

White Hive:

I am still surprised at how hot it can get in a bee suit even when the temperature is "only" in the 70s.  Since at this point in my inspection I had sweated off most of my body weight, I made this one quick.  My friend Keith was also helping me and I'm sure he appreciated the expedited inspection.  I pulled a few frames finding the first still empty of comb, but the next two were increasingly built up.  Frame 9 had about 50% comb and Frame 8 had about 80% and Frame 7 had about 95%.......and the Queen!  I've gotten fairly decent at spotting her finally!  Can you see her in the photo?

White Queen

After a short debate we decided we might as well add a honey super.  I don't really expect them to do much with it at this point in the year so any honey they store will be for the bees to eat over the Winter.

Wow, I can't believe we are hitting September at the end of this week.  Fall is quickly approaching, as is the close of my first year of beekeeping.  What a ride!

As always, thanks for reading...