2015-10-25: Winter Prep

We've finally hit a few nights of freezing temps so that means it is time to complete any winter prep that needs to be done on the hives.  I have empty feeder jars that need to be removed, boxes with no stores in them that need to be taken off (the bees don't need a bunch of extra space that serves no purpose) and mouse guards to be placed on.  I also need to decide what to do with my newly established nuc hives.

Old Nucs - Yellow/Green hives:

These are the splits I made some time ago that were moved into full sized boxes last month.  They've been feed 2 quarts of syrup each in the hopes that they would draw the empty frames with wax and start filling them up.  If I found 10 good frames then I was thinking to take two nuc bodies (5 frames each) and stack them.  It is suppose to be easier for the bees to move up in the winter and it would be easier for the bees to cover 5 frames at a time instead of 10.

Yellow Nuc:

I had suspicions during the last inspection that I had waited too long to transfer this nuc to a full sized hive and they decided to swarm (I saw some torn open queen cells).  The bees seemed "flighty" and the only brood I saw were drones.  The number of drones walking around the frames was high, especially since they should all be kicked out of the hive by now!  I did spot some eggs and developing larva but something was telling me that this was not right. 

Drones, lava and eggs but no queen

So, either I have the start of laying workers or I have a queen laying all drones.  On top of that, the bees had not touched a single new frame that I had placed into the hive.  Stay tuned for more on the Yellow Nuc during my inspection of the Green Nuc....

Green Nuc:

I was a bit annoyed after pulling the first few frames since the bees had not touched them at all.  Thankfully the original 5 frames that were moved into the hive looked pretty good.  Lots of capped honey and worker brood!  Two more frames in and I spotted the queen with her pretty green dot. 

Queen with a pretty green dot

I was even nicely surprised that after I moved past these 5 frames the bees were actually drawing out one of the new frames! 

Drawing out a frame with new wax

Have I mentioned how I love festooning bees before?  =) 

Festooning bees

 Based on my findings between both nucs, I decided the one was probably queenless and had the start of laying workers and the other was queen right.  I thought it would be a good idea to take two 5 frame nuc boxes and stack them with the best frames from each hive.  I unscrewed the bottom from one of the nuc boxes and stacked it on top of another nuc box.  Crap!  They are not made to stack.  There was a large gap between the two that would be open to the air.  Ugh.  I guess I need to deal with the full sized boxes instead.  I decided to do a newspaper combine and thankfully I had one sheet of newspaper left!  I placed it across the top of Green nuc, picked up the Yellow nuc off of its bottom board and placed it on top of the Green nuc.  The bees will eventually chew through the paper and this slow integration will hopefully prevent any fighting between the bees before they merge together into one happy family.  I'm just hoping that there wasn't some drone laying queen that I didn't spot in the Yellow nuc that ends up battling with Green nuc's queen.

Newspaper combine complete

Where did that orange pollen come from?

Yellow Hive:

This is my cutout hive that has made some really good progress over the summer.  I removed the empty feeder jar and took a look through the top box.  The bees were covering about 6 frames and had most of them drawn out. 

Yellow Hive bees

Quite a few were filled with capped honey.  Looking down into the box below I saw lots of bees and some rubber bands still on the frames from the cutout!!  They typically chew through them and dispose of them but I'm guessing they've propolised them right onto the frames now.  I'll have to remove them during the first inspection in the Spring.

Green Hive:

The top honey super on this hive was filled with drawn combs that were completely empty.  I thought for sure that when I added them that the bees would fill them quickly with the Goldenrod flow.  No such luck.  I pulled this box off after clearing a few stray bees off the frames.  I pulled a few frames from the next honey super and at least there was some capped honey there.  Looks like that box will stay on for the Winter.

White Hive:

Looking at the top honey super on this hive I could see that it was packed.  I knew this from my last inspection but I had also seen a large pile of dead bees in front of the hive.  I was concerned that this hive had been robbed out by other bees.  Well not a single frame of honey appeared to be touched so this hive should have some great stores going into Winter.  It also had a nice population of bees and when I looked closely at the pile of dead bees I saw numerous dead yellow jackets in the pile.  Maybe they tried to raid the hive and picked the wrong one to screw with!

Battle aftermath

To complete my tasks I needed to put the mite sampling boards back into the hives that had screened bottoms to prevent any wind drafts blowing up from the bottom of the hives.  With that done I also wanted to put my mouse guards on but with the entrance reducers on it didn't really look like they would fit properly.  Based on http://www.honeybeesuite.com/what-size-hardware-cloth-is-best-for-beehives/ it looks like #4 hardware cloth is the proper size for a mouse guard.  So I think I'll grab some and use that instead.

I'm also considering getting or building some candy boards that come with a top entrance.  This would allow the bees to leave the hive for a cleansing flight during the Winter if the bottom entrance happened to be plugged up with dead bees.

With four hives going into Winter and some diversified genetics (one Italian, one cutout wild open mated and two "northern" queens), I'm hoping to have some better luck overwintering this year.  Wish for a mild Winter and wish the girls luck!

Until next time, thanks for reading!

2015-06-06: Movin' on up!

...not to the East side, but to another box on the hives!  =)  If you're old like me then you probably get the quote.  Otherwise you'll just have to Google it.

The big accomplishment during this inspection was putting the second box on each hive and deploying my solar powered Arduino.  As you can see in the picture below, my deployment consists of a mesh lined ventilation board that I built.  The Arduino Uno sits nicely bridged to a small breadboard that all three DHT-22 temp/humidity sensors are attached to.  One sensor sits next to the Arduino, another runs outside the hive to measure ambient temperature and the last one runs down under the Arduino into the brood nest.  The other components here are a 2000 mAh LiPo battery, a Sunny Buddy solar charger controller from SparkFun and a 5v boost up converter that takes the 3.7v from the battery and pumps it up to 5.2v that feeds the USB connection to the Arduino.  Sitting on top of the Arduino is a data collection shield that has a Real Time Clock and an SD card reader.

Arduino Deployment

I'm really hopeful that the battery/solar combo will actually last more than a few days (unlike the 6 AA battery pack that I tried before).  I plan to walk out the the hive this weekend with my laptop and pull the SD card and download the data.

Green and White Hives: 

Since both hives seem to have good queens and have used about 80% of the frames, it is time to add the second box.  You can really see the evidence of the increase in hive population.  Bees are covering most of the frames with very solid frames of brood.

I chose to deal with two issues at once when I added the second boxes.  Many of the frames of honey from the hive that died last year were very "wonky".  There were large lobes of honey that stuck out so far from the side of the frame that another frame couldn't fit next to it in the proper bee space.  So as I added these frames to the new box, I took my uncapping knife and shaved them down flat.  I fed a few empty frames in between so it should give the bees a good guide to build straight combs.  Plus all that open honey should give plenty of fuel for the bees to build new wax.

The added box was especially helpful to White Hive since that is the hive that has the Honey Super Cell plastic frames in it.  Since the bees cannot make drone cells on the fully drawn plastic, they build drone cells on the bottom of the frames.  These cells tend to tear open when you do an inspection so you loose some drone larva in the process.  The good thing about this is that I did not notice any varroa mites on the open drone larva!  That is typically where the mites would be so maybe the mite numbers are really low so far.

New boxes going on

After I added the boxes, I put the Arduino board on top and plugged it into the solar panel.  All systems Go!

Deployment complete

Next steps:

As I mentioned, I will be pulling the first week of Arduino data this weekend.  After the bees have established themselves in the second box I will be gearing up to do two splits.  I really want to increase my genetic diversity this year.  I may sacrifice any honey production this year by doing these splits but I'm hoping to actually have a few hives survive the winter this time!

Until next time, thanks for reading!

First Full Inspection: 2015-05-13

The 2015 Beekeeping season is now officially in full swing!  I've done my first complete inspection of both hives and things are looking good so far.

White and Green Hives.  Life long buddies.

White Hive:

Upon opening the hive up, the first thing I found was that instead of hanging out in the middle of the hive, they've chosen one side over the other.  It must smell better over there or maybe there was more honey and pollen left on those frames from last year?

The Left side is where the cool kids hang out

Anyway, it made it easy to figure out which side to start my inspection on.  So I pulled out the frames on the empty side and quickly worked my way toward the middle.  On frame 6 I found a nice frame of fresh, colorful pollen.

Pollen

Some pretty typical orange and yellow colors for this time of year.  I was hoping that the bees would have a chance of gathering some steel blue colored pollen from the Siberian Squill I planted but the blooms were already spent by the time the bees arrived.  Maybe next year.

Moving on to frame 7 I spotted the first frame of capped brood.

Future baby bees

It has only been about 14 days since the bees were installed and usually it takes a few days for the queen to be released from her cage, and then maybe a few more days before she even starts laying eggs.  The eggs hatch into larvae and then the cell is sealed on day 9.  So, I'm guessing these cells have only been capped for a few days at most.  If that means the eggs were laid 12 days ago, then in 9 more days they will start hatching.  Then we'll get to see what this queen's genetics are going to look like.  This hive has been a bit more "touchy" than the Green Hive so far.  Hopefully when the new bees take over they will have a little calmer disposition.



Green Hive:

I love the look of new comb on foundationless frames!  Green Hive did not disappoint me either.

New comb being formed

It is fascinating to watch as the bees drawn down a sheet of hexagons on the frame.  The new wax is a nice pale yellow color and it is just waiting to store something!

Well, this queen has been filling the frames with brood.

Pretty solid brood

Sometimes new queen have a very spotty brood pattern when they first start.  This frame looks pretty good to me.  You can also see that there is a cluster of drone brood along the bottom of this frame.  Right before I took this picture the bees were doing there job, covering the frame and keeping the brood warm.  If you blow on them, they don't like it and they move out of the way rather quickly.  I think it has something to do with the CO2 that we exhale.

A few frames over I was able to grab a nice close up of the developing larva.

"C" shaped larva

Notice the different sizes of the larva.  The queen usually lays her eggs in a circular spiral pattern.  So the larva in the center of the frame are bigger (older) and the ones toward the outside edge are smaller.  If you zoom in really close on this photo you can even see the eggs to the right of the smallest larva.

I'm really glad to see both hives getting off to a really good start so far in 2015!

Next Steps:

I have completed my solar Arduino setup and I plan on deploying that again soon.  I also plan on taking some of the remaining honey frames from the hive that died this past winter and feeding it back to the bees.

Until next time, thanks for reading!

Second Inspection: 2014-06-10

I was very eager to complete this second inspection for a few reasons.  First, I was very eager to retrieve my fist set of Arduino Smart Hive data!  Second, the hives are currently at Installation +30 days (Bee Math) and there should be many more young bees in the hive.  Not only will these bees be nurses for the next generation, but they will also be wax comb builders (Honey Bee Worker Jobs).  So, they should be expanding the nest area and allowing more bees to forage for nectar and pollen.  The increasing number of bees also means they will be running out of space soon.  Normally in nature, the size of the cavity the bees live in does not increase and when they run out of room they swarm.  Part of being a beekeeper is controlling the bee's swarming nature by adding more space (boxes) and I needed to see if it was time to add another box or not.  If your hive does swarm you've lost probably half of your bees and your old queen.  Not a good thing if you actually want any honey.  Plus most of your neighbors probably wouldn't appreciate a swarm of bees landing in their yard!  Well, onto the inspections...

Green Hive:

I opened the lid and found that my ventilation board with my electronics in it was nicely stuck to the top of the lid.  There must have been some propolis left on the underside of the lid and it works really nicely as glue.  I spent a few minutes trying to remove the ventilation form and when I finally removed it, I notice a LARGE, furry black spider resting comfortably on the underside of the lid.  Thankfully I was armed with a steel hive tool and dispatched the menace quickly.  I really dislike spiders but I also know they do eat "bad" insects, so I try to leave them alone when I spot them in the garden.  But when they are around my bees I show now mercy!  I'm sure beekeepers in Arizona, Florida or Australia can get some really nasty surprises around their hives.  Yikes. 

Anyway, after all that drama, I pulled the SD memory card from the Arduino and downloaded the data.  My first disappointment was that it appeared that it only logged about 3 days worth of data.  It appears my 6 AA battery pack didn't last very long at all.  I'll be looking into an alternate power source for sure now.

Arduino Smart Hive data

With that said, it was cool to see that the general data collection does work!  From the data it looks like the external sensor might be a little flaky since the humidity spiked at 100% a number of times and the temperature measured at 103.82 F on June 2, 3:22 PM.  According to the weather report on that day, the highest it hit was 82 F.  Other than that oddity, the data looks consistent.  What I really like seeing are the readings from the brood area.  The temperature reading is a very flat, steady line, right around 95 F.  Despite what the outside temperature is, they do a fantastic job of maintaining the same temperature and humidity levels where the baby bees are being raised.

Pulling the first two frames from the hive, I saw they were still empty.  The third frame in was built much wider because of the empty space next to it.  With the top down view in the photo below, you can see how the wax sticks out past the top bar of frame 3.

Green Hive

Frame 3 was heavy with honey and frame 4 was the first to have brood on it.  Typically the brood nest is toward the middle of the hive so it was no surprise to see frame 5 had a lot of brood on it.  The other side of this frame had a large empty area where all the baby bees had already hatched out of their cells.

Hatched Brood

Frame 6 looked very similar to 5.  Frame 7 was about 50% covered with capped brood and had a large section of new wax drawn out.  Looking closely I could see there were eggs in almost every cell in the new section of wax.

Frame 7

Frame 8 and 9 actually had some large patches of brood on them with an empty queen cup as well.

Queen Cup

Thankfully there wasn't anything in the cup so it doesn't look like they are preparing to swarm or replace the queen.  The last frame hadn't really been touched by the bees since the last inspection.  So in total there are still 3 empty frames in Green Hive.  Looks like I'll be ready to add another box during my next inspection.  They are coming along nicely!

White Hive:

The first thing I noticed after removing the inner cover of White Hive was that I could see bees looking up from between almost every frame!  This hive in increasing in numbers more quickly than Green Hive for sure.

Looking into White Hive

The bees had stored quite a bit of nectar and pollen and the brood nest started a few frames in.  The queen in this hive knows how to lay some eggs!  Look at the photo below.  This frame is wall to wall brood with very few empty cells.  They will be bursting at the seems very soon.  I will need to add a second box for sure next week!

Lots of future bees

You can also see the patch of drone brood that was built along the bottom of this frame.  And speaking of drones, I was able to witness one being born.  Very cool!  You can watch the 30 second video here: http://youtu.be/X1rwGvIbuck

The last thing I did before concluding the inspection, was to change the entrance reducers on both hives from the small opening to the medium sized opening.  The population should be steadily increasing now on both hives so they should have no trouble defending a larger entrance.  This will also help alleviate any congestion as the foragers come and go all day long.

Looks like I have a lot to prepare for the next inspection.  New boxes to add and hopefully another way to power my Arduino.  So, until then thanks for reading!

First Inspection of the year : 2014-06-01

Twenty one days since I installed my two packages and I finally opened the hives up to take a look.  I should have done so much sooner but it sure seems like everything needs to be done all at the same time during the late spring.  It is always exciting to dive in and see what the girls have decided to do inside the hive despite the guidance the beekeeper has given them!  Bees don't read beekeeping books to figure out what they are suppose to do  =)

Green Hive:

The one nice thing about the inspections early in the year is that there aren't as many bees as there are during summer.  It makes it much easier to pull frames and move things around when there aren't bees covering everything.  You also don't need to use as much smoke since a few puffs can easily get most of the bees to move.  I was able to pull the first three frames quickly since the bees hadn't even touched them.  They are foundationless frames, so they are completely empty and the bees haven't thought about drawing out new comb on them yet.  I reached frame 4 and I could see the beginning of the honey and pollen storage. 

First inspection of Green Hive

Frame 5 had more pollen and honey and frame 6 was the first brood frame.  Interesting pattern on this frame with bits of pollen scattered among the brood cells.  About a third of the frame (on the right side of the photo) was all drone brood.

Brood frame

A little spotty so far but not something I'm too concerned about at this point.  It can be common in new queens.  I'm happy the queen is raising brood and she is fertile enough to have worker brood.  Next frame over was almost identical with drone on one side and worker brood on the other.  I spotted a queen cup but it was empty.  It is not uncommon to see queen cups.  The bees like to make them just in case they need them.  Frame 8 had some new, white comb drawn by the bees and they were starting to bridge it over into the next frame.  This is one of the struggles of letting the bees build their own comb.  They don't always build it in perfectly straight sections.  I cut some of the comb out and mashed some more together to try and make it straight.  I also swapped frame 9 with 8 in the hopes that they would make the small amount of comb there straight.  The last frame was empty. 

I did not spot the queen and I didn't specifically see any eggs but they seem to be going along pretty well.  As long as I see some new larva during my next inspection, I'll know the queen is still there.

So, besides doing my first inspection on Green Hive, I was also ready to deploy my Smart Hive Arduino system I have been working on.  It was a bit of a pain to run the one sensor through the inner cover without having someone to hold it but I was able to position it between frame 5 and 6.  Now I can only hope the bees don't chew through the wire insulation or decide to build bridge comb all around it and make a mess.  The second sensor goes out the side vent hole to measure the outside temp and humidity.  The third sensor rests near the Arduino in the vent board.

Arduino deployment

I'm looking forward to posting the first data points in my next blog entry!!

White Hive:

 The frames in the White Hive are fully drawn out plastic Honey Super Cell frames.  They fit much tighter in the box than the wooden frames in Green Hive do.  I have a "J-Hook" hive tool and it really helps to pull that first frame out.  A few bees danced across the frame I removed and I began to pull the second frame out.  For some reason, I did a mental double take and picked the first frame back off the ground where I had set it.  My eyes popped open when I realize there was the queen!!!  Running around on the frame with only a handful of other bees there!  Very unusual since the queen usually has a group of bees around her taking care of her needs at all time.  I quickly picked the frame up and hovered it back over the middle of the hive until I saw her walk off the frame and back down into the box.  That could have been bad if she had walked off into the grass or dirt somewhere!

The next two frames were empty like the first but on frame 4 I found the first scattering of brood.

Drone comb on plastic frames

On the bottom of this frame you can see that the bees decided to build some comb off of the bottom of the plastic frame.  Since the bees cannot enlarge the plastic cells, they have to build spots of comb with cells large enough for the queen to lay drones in. The next frame had a little brood on it and some nice colored pollen in the upper cells........plus the queen I almost squashed earlier!

Hi queenie!

Can you spot the queen the frame?  Starting from the middle bottom, about a third of the way up, just a bit to the right of center she sits in all her glory.  I pulled the next frame and was pleased to see it was solid brood!  A really nice pattern with very few cells still empty.  To my surprise, the next two frames were packed with brood too!  Wow!!  This queen is really a good egg layer.  I pulled frame 9 and it looked almost entirely empty until I held it up with the sun at my back.  When the light revealed the bottom of the cells, they were filled with tiny eggs.  This hive is going to be booming in a short period of time with this queen!

It is looking like a nice start to the 2014 beekeeping season.  The first new bees should start hatching any day now so the currently diminishing population of bees will make a nice turn the other direction building up to the hive's peak population in the summer.

Until the next inspection report, thanks for reading!

Anti Robin Hood: 08-06-2013

You've all heard of Robin Hood, who robs from the rich and gives to the poor, right?  Well, in the bee world, their hero is the Anti Robin Hood!  They rob from the poor and give to the rich and powerful!  This is the sight I beheld as I approached the split hive to begin my inspection.

Split Hive:

As I came upon the split hive I immediately noticed a cloud of bees swirling around the outside of the hive.  Instantly odd since the population was so low that even basic in and out traffic was not very prolific.  The other thing that was odd was the majority of the cloud of bees were attempting to enter the hive under the telescoping cover instead of the actual entrance.  These were all signs that the hive was in the process of being robbed.  When a strong hive finds a weak hive that cannot defend the supply of honey they have, then they overpower the guard bees and steal the honey.  Not a good situation since bees are killed during the fighting and the weak hive can either be greatly damaged or destroyed.

Here is a photo of what a honey frame looks like when it has been robbed.  The cells have been torn open during the frantic raiding and have a very jagged appearance.

Robbed Frame

I had placed the entrance reducer on the smallest setting when I first set up the split hive and I thought that would be enough.  Not only did I made a mistake by putting the split into a full sized deep box (instead of a 5 frame nucleus hive), but adding a second box of honey wasn't good either.  I set them up to fail by giving them way too much space to defend with way too few bees.  Learning from mistakes are the best lessons, right?

Upon opening the hive it was obvious to me that the only bees present were the ones robbing out the honey.  There was very little honey left in any of the frames and I quickly went through both boxes looking for any sign of the virgin queen that was spotted two inspections ago or any sign of eggs or larvae.  She was no where to be found and the small cluster of about 50 dead bees on the bottom board told me that if I did find her, she would probably be amongst the dead.  I combed through the dead bees and did not find her.  I did find a dead yellow jacket and a bee with its stinger and venom sac exposed.  No doubt, she died in battle.

With nothing else left to do with the split hive (or ex-split hive), I decided to add the now mostly empty brood box onto White Hive.

White Hive:

My goal this time with White Hive is to verify that what I thought might have been eggs really were freshly laid eggs.  As you may recall, I spotted the queen during my last inspection.  If she was from the queen cell I installed, I wouldn't have known for sure that she had flown out and successfully mated.  If I find eggs that tells me that she did.

The first few frames were honey with some pollen as I expected, but as I pulled frame 4 I hit the jackpot.

Larvae!

Since I know the "bee math" http://www.bushfarms.com/beesmath.htm, I know that when an egg is laid it takes 3 days to hatch, spends 6 more days as an open larvae before it is capped (total of 9 days) and then 12 more days before a new bee emerges (total of 21 days).  This photo shows big fat open (uncapped) larvae that will be capped any day now.  So they are probably somewhere between 6 to 8 days old and that places them as eggs during my last inspection on 7-30!  I love it when I can actually figure things out!

On the other side of frame 4 I was able to spot a baby bee emerging from her cell (dead center), some very tiny larvae (two cells down to the left) and what looks like a tiny grain of rice......an egg (one cell down to the left and another one two cells down to the right)!

Eggs and Larvae

Now that I know the Queen is laying for sure, I can stop worrying so much about White Hive.  She should really be cranking out those eggs, possibly 2-3 THOUSAND every day!  More than her own body weight!

Continuing on, I found what I think was one of the old Queen Cups that the bees decided they do not need anymore.  They look like they are in the process of tearing it down.

The remaining frames had more honey, pollen, open larvae, capped larvae and a small patch of drone brood that is just about to hatch on frame 7.  White Hive looks really good and with a new Queen going full bore, they should be very strong going into Winter. 

Speaking of changing seasons, I saw some Goldenrod in bloom.  That sure heralds the end of summer doesn't it?  Lame!

Until next time, thanks for reading!

Post Action Assessment: 07-30-2013

Task number one during this inspection was to check the split hive and hopefully find evidence of a laying queen or at least find the (hopefully) non-virgin queen.  Task number two was to check White Hive to see if the queen cells spotted last time were completed or destroyed and if I actually have a laying or virgin queen in that hive as well.

Split Hive:

The population in this hive is still very low.  I had put the extra box of honey on the hive to make sure they had enough but I think I have given them too much space for too few bees.  There are lots of ants roaming around unchallenged eating honey.  They don't bother the bees but in a strong hive they wouldn't be in there at all.  The low population does make it much easier to inspect the hive and spot a queen though!  I quickly went through the box of honey and found a few bees but no queen (nor did I expect to find her there).  Going through the brood box I found some honey and nectar and a tiny bit of pollen but I found no evidence of a queen (virgin or otherwise) and no evidence of eggs, or larvae.  Based on the "bee math" I provided a link to in the last blog post, it could still be a bit early for the hatched queen to have flown out, mated and returned to lay eggs.  I'm really hoping that we did not scare her off during our last inspection and she did not come back!  At this point, I will give it one more week before I take some other action.  It is pretty late in the season, so the only practical option may be to just recombine this hive back into White Hive.

White Hive:

One of my goals this year was to keep better records.  But I am finding that I just don't have enough hands to record things on paper, plus take pictures, all while trying to manipulate frames and smoke, etc.  So this time I tried to just take a photo of each side of every frame.  It was still very clumsy but I made it happen.  Photos are great because you can often spot things that you did not see while inspecting the frames.

Inspecting the top box, it was mostly filled with honey along with a few frames of foundation that the bees have barely touched.  Having a filled frame next to an empty one just makes the bees want to draw out the filled frame even more, so I have some giant frames of honey in there!  I'll pull those for sure this fall.

The bottom box also had a lot of honey and the pollen stores seemed much larger this time.  Possibly this is because there are no larvae to feed the pollen to! 

Honey and Pollen on frame 2

I kept moving through the frames hoping to find the hatched queen or the queen cups I had spotted last time.  I hit frame number four and there was the queen!

Queen Spotting can be challenging!

Can you see her?  It always gives me a jolt when I finally spot her. 

She is in the middle of the frame a few inches down from the top.  Here she is a bit closer:

I spotted the queen, but is she the old queen or the new queen?  And what about those queen cups I saw last time?  To answer these questions I need to see if this queen is laying eggs and if the bees destroyed the queen cups.  Onward!

I continued to find patches of brood that have not hatched yet as well and large open areas with nothing in them.  Some pollen and honey on almost every frame though.  On frame 7 I hit a small patch of drone brood and this is the frame I spotted the queen cups on.

This picture wasn't as good as the one from last time, but you can see they are still open and have not been capped and turned into full queen cells.  It looks to me like the bees removed the two larvae that were in these cups.  I assume they realized they had a queen and no longer needed to raise a new one.  This is a good sign!  My main goals accomplished, I finished inspecting the remaining frames and closed up the hive.  I looked very closely at each frame and I could not find any eggs or larvae for sure.  On the photos for frame 6, if I zoom in very closely, I can see what MIGHT be a few eggs but I'm not sure.  I guess I will know which frame to look on during the next inspection to see if those phantoms have turned into larvae!

Possible eggs in the empty area to the right of the capped brood?

All in all I was pretty happy to "bee" back on track with at least one hive!  We shall see what the next inspection reveals!

On a side note, I planted some Borage this year in my garden because I had read that bees really like it.  I'd never even heard of the plant before, but as you can see in the photo, they like it!

Until next time, thanks for reading!

Hive Inspection: 06-04-2013

It is always fun for me to be able to share my beekeeping experiences with people.  During this inspection I had a friend of mine along to help.  I also enjoy teaching "newbees" all about the different miracles in the hive.  This inspection allowed me a lot of opportunities to do so!

We saw pollen, nectar, capped honey, open brood, capped brood, drone brood, hatching baby bees, queen cups and the queen!  I'm not sure what else there would be in a hive that I would even want to show someone.  It is really hard to see eggs and I don't care to show someone Varroa mites!

I've come to realize that people judge the strength of their hive by how many frames the bees are actually covering.  So I made sure to take note of this.  As of last inspection, I knew the queen was in the top honey super after the long, cold winter and there was plenty of brood there.  I was hoping all the brood had hatched out (new egg to hatching = 21 days) and the queen had moved down into the bottom two brood boxes.  Well, I had half of it correct.  She has moved down and been laying in the bottom boxes but she must have also laid a few more eggs in the honey super as well.  Here is a really weird brood pattern because of this:

Not only is there uncapped nectar and pollen scattered around, but there are little pockets of brood here and there and a few drone cells along the bottom edge toward the right.  I was hoping all the brood would be out of there so I can use these frames for honey later in the year.  I could use this frame as a part of the split I plan to do in the next week or so.

One of the greatest things in the hive to witness is a new bee being "born" or emerging from its cell for the first time.  Watching them poke out and move their antennae around is amazing!  Look right in the center patch of capped brood and you can see two little heads poking through and looking around!

 The bees were only covering about 5 / 10 frames in the top box and most of the empty frames hadn't really been built out much.  So, onto the next box!

It took me a while to figure out how to get the first frame out without squashing a bunch of bees, but with a little smoke and hive tool manipulation, I was able to get it started.  On this frame I was very pleased to see a SOLID patch of open brood.  You can see right along the center of the photo a whole bunch of pearly white glistening larvae!  Nice!

I would suspect the queen is probably actively laying eggs somewhere in this box.  I was really hoping to spot her too so that I could show my friend the queen in all her glory.  On the very next frame I pulled out, there she was!

Can you spot her?  No?

How about now?

I know, they all look like "bees", right?  Well, if you still can't spot her, she is just slightly above dead center in the photo.  Her abdomen is darker brown and less striped looking.  Also, her abdomen sticks out way past her wings.  Hopefully you spotted her!

At this point in the inspection I decided not to go through every frame in the box.  And I decided not to go into the very bottom box either.  I had seen and shown all the really important things and the inspections always take longer than you'd like to think.  The bees were probably covering 8 / 10 hives so that box was pretty strong.  I closed the hive up and called it a day. 

I was happy to see that the queen was strongly laying in the lower box and that there were a few drone cells dotting the bottom of some frames.  I did not see any drones walking around but I'm sure they will be out within a few days for sure.  This is important because I intend to split the hive and have them raise their own queen.  A new virgin queen will need drones and if there aren't any around then she isn't going to be properly mated.  Not that she would mate with her own drones, but if you have drones in your own hive, then there are probably drones out in the wild too!

Next post I hope to be showing you my new split.  Until then, thanks for reading!